Separate names with a comma.
Some features disabled for guests. Register Today.
Same thing essentially, US tends to do GFCI outlets (trips at the wall plug) UK, ZA etc we have a RCD (Residual Current Detector) before all the...
EU/GB/ZA and some others uses Green/yellow as Earth, blue as neutral, brown as live. These countries all have proper 30mA RCD protection at the DB...
Plate thickness = measure your Probe plate with calipers. If your place puck on top of material, then do a z probe, then once its finished,...
Yeah the grblHAL wiki not yet as good as the old Grbl Wiki, checkout https://github.com/grblHAL/core/wiki/Additional-or-extended-settings
Set $44=4 (Does Z first up and out of the way before anything else, just good practice in case endmill was down in/on the job - get it up and out...
Good catch MisterG - that particular phrasing is used online, not by us, so Cliff, please do make sure you are looking at OpenBuilds Part Store or...
Yes, sadly unfortunate - scrupolous vendors providing the "wrong" stuff first time round catches up at some point. They are quite well known for...
Grab a CNC Electronics Bundle - comes with everything you need. The machine you have has high inductance motors, questionable power supply,...
COM3 reports its an arduino uno. Not an Interface (would show FTDI more likely) Sure you a) have the OpenBuilds Interface plugged in b) correct...
Zero? Impossible - am XYZ probe always has a shoulder of some thickness... Sounds like you have a "z probe" - in which case move off the XYZ...
Unable to replicate. Video and any additional info? Using probe wizard or custom macro? Do you have any custom macros? Does the machine stay...
Multimeter across VFD terminals, BEFORE connecting BlackBox :) A clean "input" should not have any voltage present. Measure between X1 and...
Home on power up, and after every crash, alarm, error, abort + any time you are not sure if its still homed Home sets Machine Coordinates...
Step 1: Click Home all Step 2: All done Home, then setzero/probe, then run the job
Would have to ask the store, usually just part of the kits. Try Support > New ticket to speak to that team
Checkout CNC Electronics Bundle - will do fine, ACRO uses NEMA17s - full kit comes with everything. Might need some substructure to keep it solid...
Steps per mm would mainly depend on the mechanical components. New pulleys and belt pitch will be different yes. Quite simple Grbl v1.1...
The one already damaged will likely continue to stay in that state yes. The question is more of a post-morten - what happened to it, to avoid...
Nothing obvious from the pictures, but the symptoms you describe has a couple main causes, might give you some clues where to look: - PSU wired...
Grbl settings backup for review too please? (CONTROL > Grbl Settings tab > Backup Settings button) - seems to want to move quite fast
