Separate names with a comma.
Some features disabled for guests. Register Today.
This message of yours [IMG] Confirms its still running in the background If it wasnt running, you'd be able to delete above, so check again....
Confirm with your VFD and spindle vendor about specifics, but usually both spindle body and VFD has an Earth (connected to mains earth) Low...
Unable to delete because its still running in the background. 1) Check Task manager and kill any stuck ones 2) Then try uninstall / delete type...
CAM > Settings tab > Settings button > add a router / spindle as tool add-on > Save
It should, follow store checkout procedures it will list available shipping options Make sure to get 24V Meanwell Power Supply Bundle as well...
Please contact the vendor you purchased from for assistance, or replace the controller with something a) a little more modern and b) from a...
We recommend you run an OpenBuilds BlackBox X32 (see https://docs.openbuilds.com/blackbox-x32) Up to date 32 bit hardware, entitled to tech...
Grbl Panel is very old, outdated and retired. What controller are you using? Last release was in 2018, repo archived in 2019. Going on 6+ years...
See docs:blackbox-x32:currentadjustment [OpenBuilds Documentation] - fault LED is described on the same page
1) should be NPN type sensors (important) as shown on docs.openbuilds.com > blackbox-x32 > inductives section. 2) remember to set the Limits...
EstlCAM's firmware is for old 8 bit arduino based controllers. Won't connect to newer 32 bit grblhal based systems... You can use it as a CAM >...
Did you remember to CONNECT so the software can see there's a 4th axis controller connected? You have to be connected first before the buttons...
Most likely :) Last update just made some changes to the surfacing wizard and removed a couple old retired machines from the list of machine...
Try a windows PC first, on Linux/Mac you can sometimes run into issues with python etc
1) if you configured a Door, close it to clear the alarm. If you do have a door disable accordingly 2) don't use V1.0.200s which this thread is...
Correct. Fusion and Deskproto are our 4 axes recommendations Would work yes. Just use...
What machine/controller are you running? If its not a grbl/grblHAL based controller it won't work with the newer stuff. V1.0.136 is suuuuper old...
Hasn't been any new Grbl releases since 2019 so nothing newer to update to Proving that Grbl and a well implemented Grbl compatible host works...
We will have to ask @terjeio if that can be added to Web Builder.
Regardless, please do the test, so we eliminate other non-PC causes from the test. If it also fails on the other one --- then its NOT that laptop...
