Separate names with a comma.
Some features disabled for guests. Register Today.
@Alex Chambers A couple of messages ago I asked whether, after moving 1000mm, the machine would go back exactly to the start point => Yes that...
Hello, Just to give you some updates. I am in contact with the support of ooznest everydays since 15 days and test some stuffs everydays most of...
Hi, Here are the latest news. The ooznest support asked me to adjust all the exentric spaces to largest position (the 6mm text facing the bottom...
Here is both the circle and the lines tests. I have a lot of time a gap of 1 mm... [ATTACH] It is not very readable but the right circle is 58.7...
I have rerun the test of printing a circle of 60mm of diameter but I still have 58.5mm on the X axe and 59.2mm on the Y axe I have run the test...
Ok, I have recalibrate the X and Y axes (the M92 command) so now when I say move 1m on the X or Y axe it is ok again. But this doesn't change the...
Here is the picture of my last test...
I had done this procedure before the recalibration of the wheels. But now that is is less clamped, I guess that is it a good idea to do that agin...
Hello, i have also received a response from ooznest: Issues like your seeing is normally down to 2 things: - Pulleys slipping. Are you using the...
Hello, No for the moment I have checked everything I can without more success. I have juste notice a wheel on the right side of the Y axis who is...
Hello, I have recently mounted my new Workbee 1500mm x 1500mm for ooznest so now I play with it. My current issue is the precision, I have...
Hello again, The support send me the solution today. i had miss the step 7 of this guide: Connecting, Updating and Configuring Your WorkBee So,...
Hi again, Yes I have the 1500*1500. I guess that I should keep the soft limit especially because I am a beginner but I will take your remark in...
Yes I edit it this way. See the screenshots... Especially the Head position and machine properties
When you say system editor you mean the web interface? If yes, yes it is the way I modify it. I have even tried to directly type M208 X1300 Y1270...
Hello, I am a total newbie in CNC. So I have buy an just mounted the Workbee kit. Now, I am playing with the Duet Web Control. What I didn't...
I have found the collet in my local Makita dealer here in Belgium they can have in 2-3 days so that is not an issue
ok great thanks again Alex!
Yes but I my machine have a diameter of 8mm so can I use an adapter into another adapter?
Hello, I finally found an adapter for the 8mm to 1/4 inch in the makita catalog (référence: 763637-1 if someone need it in the future). But I...
