Separate names with a comma.
Some features disabled for guests. Register Today.
Typo from my side, it should say 175 where I wrote 170. Yes, the 175 will work fine with the xPRO and not too long cables. The 345 will pull way...
Hello Rob, I have failed to get the 345oz.inch motors, the high torque series, to run with the xPRO. How long are your cables and have yo...
Hello Robert, the latest wheels with the "OpenBuilds" marked in them are better and should have no play with the bearings, the Xtreme wheels...
The NEMA17 motor will consume about 0.7A @ 24vDC, and 1.2A @ 12vDC, that is under the 1.75A RMS that the DRV8825 can deliver, so yes, the xPRO is...
To answer your question: -It's normal for the DRV8825 to get hot, and real hot is when you burn your finger but it will get there with NEMA23...
As I know it's all about you route it, the digital (PWM) pins 2 to 11 can be used, but I have no knowledge of the Arduino Stepper library, sorry....
The electronics are based on this: [IMG] Limit switch pins have been changed and depend on what version of the xPRo you have. You might be...
@Jonathon Duerig, I just make sure that the screw grabs as much T-nut as it can, there isn't any advantage other than not having to use a 1mm...
If you leave the "stand off teeth" on, you need 10mm screws, but it's better in most cases to take a file to it and flatten the sides of the...
Hi Tim, check this out: Grbl Panel Control | Page 2 | OpenBuilds And yes, get always the latest JAVA: Download Free Java Software -Ronald
