Separate names with a comma.
Some features disabled for guests. Register Today.
The PSU you have was the best I could find for the price, plus they are slim and don't make noise (not that we care about that, do we? :) ). Those...
You just need 2 x DQ542MA drivers (Z and X), the DQ860MA if for both motors on Y. Is it a brand PSU or just a LED strip PSU? LED strip PSUs are...
Forget the TB6600 and TB6560, those are not precise enough and not up to date. I would recommend digital drivers but they are a bit more...
Nope, go with some real drivers please ;).
The DeWalt DW611 won't be used, it will be a DW660 with a cheap motor/fan/router controller from e-Bay to lower RPM to 10,000rpm. The DW6600 has...
Hello @Philip UD, Cost of the belt, pulleys and tension hardware is more expensive than adding an extra motor and using a good driver, however,...
They use 2 cheap drivers, if they would use one good driver it would be better, and if possible a digital one. -Ronald
Forgive me for teasing, I would never do that ;). I will, I will, in time, but the build up. This is a build with large plates, some based on the...
Hello @Metalguru, Nice build, good photos that will help some people out. Those rubber end-stops are a good idea for the beginner. The inductive...
@GrayUK Most free shipping has no tracking number, comes with regular post and they leave the tracking out to save 1.50USD or so. Takes also a...
Well, the nylon spacers are okay for the load, still, aluminium is better. I was referring to the printed parts, the green plates (they are...
Hello @HPB, The spacing should be 51.9, so 52.0mm is fine. It's best to use eccentric spacers on both sides of the wheel so the wheel doesn't...
Hello @yannyann, I should apologize for what I wrote above as there was indeed that single belt; I believe that the parts can still be ordered if...
Hello @yannyann, This machine doesn't use a belt, it's based on Acme screws.
Check this build out: Big Ox Heavy Duty
Hello Peter, check out this link to get an idea on the double belt drive: OX CNC and the Everman drive system. First,... - Maker Store Contact...
If you stay small the Ox is a good options but it is a bit outdated as the gantry is only 2x 20x60mm V-Stot, it will flex a lot when using a...
What country are you from?
"sorry for the questions but i wanna know what i can do with the machine and what not." Well, you should turn these questions around, and tell us...
Why not use the SketchUp version and export it to STL for example?
