Separate names with a comma.
Some features disabled for guests. Register Today.
8 Seconds? o_O Sure you can show more! Great work, it looks like you are enjoying it :thumbsup:! -Ronald Edit: I had to watch it like this:...
O yes, for sure. I'm using a net-book (Atom 1.6Ghz, 2GB, 10" screen) for communication and I'm going to use the G-code "sender" build into ESTLCAM.
Hello @Paul Stoller, Check out the post here: GRBL driver shields? . I'm still working on a write up of the limit switches. -Ronald
Does it need to be a shield or small drivers? How about an Arduino uno with screw shield and larger drivers? [ATTACH] -Ronald
My bad, 1/16, just to test as 1/8 should be good. You are using 3GT /GT3 belt right? Any specs on the motors or are they the 175oz ones? -Ronald
Hmmm, try 1/8 divider for the NEMA23 motors, it should work smoother and might solve your problem. Also, use a fan on the xPRO to make sure it0s...
Or the other way around; not enough juice. Still, in both cases the variable resistor needs to be adjusted @dirtdemon, and I also know what your...
Good dad!:ROFL: Age 66 and still playing video games? [IMG]God, there is hope for me, well, us, Mark seems to be hooked as well[IMG]! Playing...
@ensari cokur, That's sweet! Thank you for posting the video. Make sure your table is 100% straight with the Dremel 3000 you are using. Even for...
Hello @ensari cokur, The "speed" you are talking about is called "feed", used for example in G-code G00 or G01 Y30 F2500 (you guessed it, "F"...
I like this a lot, and others will as well. I'm thinking of building one of these and use it for the demonstration of actuators (PM send to you)....
You can use lubricant just on the surface, just make it "oily". Keep the bit cool and make sure you clear the bit from debris while cutting. It...
@Jimmybuckets, Do you cut that dry? Did you try with coolant and lubricant? Looks like you are forcing the cut too much and motors have problems...
Hello guys, I'm still working on the wire diagram for the control panel. I thought I would make it in one day but I'm just using AutoCAD to draw...
Hello @Acuralegendz, Check the connection of the wires of the motors, you might have one phase reversed. -Ronald
Mine is still single speed as well, no laser and all that. I use WD40 for cutting/cooling but there is special cutting grease that I can't seem to...
I have an older model of this: [IMG] And I use this blade, so not just a wood blade: Freud LU77M012 12-Inch 96 Tooth TCG Thin Kerf Non-Ferrous...
@David Crain Have faith in yourself ;). It looks you are worried too much on cutter the V-Slot. As far as I can see all numbers look okay...
You can't go wrong unless you cut the V-Slot to short, still V-Slot isn't the expensive part of the Routy, and it’s mostly the other hardware that...
This is why I said, build like you think it will work, there are always ways to make the Routy work for your needs without rebuilding the whole...
