Separate names with a comma.
Some features disabled for guests. Register Today.
Hello David, The Y and X size will not be a problem, but you need to tinker a bit with the Z-axis to have a work height of 6". The Routy was...
Hello @Jonathon Duerig, I've still have to play with cutting harder materials like non-ferrous metals (the soft ones that is ;)). But, what I've...
Hi guys, Thank you for your nice comments! @Rick 2.0, the build plate won't be put back. There will be a 1/2" aluminum plate for table, and I've...
It comes with the wheel kits, or can be bought at the OpenBuilds shops. -Ronald
Ronald van Arkel published a new build: So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this...
Hello @RaGaWoods, I made a manual on building a small machine, it might help you as well: Routy GT2 290 BSX CNC Router, Low Cost and Good!...
@Chris Laidlaw, Are you talking about the difference on the width of the mini and full size V wheels? If so then full size wheel is 11mm and mini...
@ensari cokur, Starting to look great ;). Just set the gantry height to the height you need, this will reduce flexing of the X/Z axis. Next...
Now I think of it, I need to update the BoM, description for the eccentric spacers is obsolete. There are no “full size” eccentric spacers sold...
Hello @andy-may, What you just said is why the Routy exist. It might be a low cost but it is very durable and can be used to build larger...
Take a look at the OpenBuilds OX, the Routy I modded is more like the OX and not like the first Routy that @Mark Carew made. The motor and V-Slot...
Hello @David Crain, Don't you worry about using a bigger tool than a Dremel 3000, it will fit fine. When you are done with your build you can...
Hello @David Crain, A 16t pulley will do fine. I made the choice over a 20t pulley for higher resolution and torque, that is all. I never saw the...
Hello @David Crain, With a V-Slot of 170mm on the Z-axis, and also on the legs of the gantry (yes, 170mm there too), you would have a movement of...
Hello @finalcountdown, The small plates that you see are T-nuts, SKU 50 (25pcs), the bushing in the center is a 6mm or 1/4" spacer, SKU 90 or 15....
Hello Alex, With that many questions you might consider as Charles says, just make a new topic in the main section of "routers". When you start...
WD40, perfect for cleaning sticker residue/glue ;).
I would clean it with WD40 and a cloth, that brush I was talking about are made to put on the inside down on a door. The brush isn't sold all over...
Better to take some pictures of your machine so we can also see what you are talking about.
Hello @hosa200, I can't find the topics, mostly about the OpenBuilds Ox, in this forum to show you how to keep the rails clean before a wheel...
