Separate names with a comma.
Some features disabled for guests. Register Today.
Performing several tests with the $1tr in tinyg I changed it from 1.25 to 6.685 it now travels with jogs correctly. Took me some time to test...
Here a gcode... G21 ; Set units to mm G90 ; Absolute positioning G1 Z2.54 F2540 ; Move to clearance level ; ; Operation: 0 ; Name: ;...
I trying to test my system and having some issues on the tinyg with chillipeppr cutting to big. I designed a small simple circle in inkscape and...
Problem fixed... I discovered the $3tr=1.25 was the same on $1tr and $2tr. But on $4tr it was 3.60. Changing it to 1.25 and reconnect the...
So I finally got every thing connected on the tinyg. I have motor3 and motor 4 on the y-axis. I set $3ma and $4ma to = 1. I can turn the motors...
I have a little tool that looks much like a dental tool. I am able to get it between the wheels and you slot rock it from two or three points and...
I just put together a box for the PS and tinyg made from Baltic Birch, glue drying now. I will then install some 12V fans X 2 in the box to...
I was on this thought of having a remote self contained box to keep them out of danger.
As I am installing the brains of the operation of the CNC machine I was attaching the the project box with the tinyg inside with a fan. Plus...
gazingm42 published a new build: 1000mm X 1000mm overhead cnc machine Read more about this build...
So got my unit built and have my tingy g connected on the desk with power supply and PC. I able to connect via coolthread console and send...
Good Idea. I seems the top part or the thinner part works smothly. But the lower half or larger section is very tight.. I will send them a...
I thinking of use twobof the nut blocks vs this anti backlash. Seems to be much smoother.
So I having issues with the anti backlash being hard to move with my hand on the Z axis. The Y and X which don't have the anti backlasth move...
Giarc. Nice I will check this one out. I would love to see some of your work.
Thank you
I like the the effects on simply cuts using a carbide "V" bit. Specially using it when cutting fonts in a sign as it gives a more depth to the...
Thanks, This helps a lot. Make my decision easier. I have my ordered all the hardware yesterday afternoon. Now it makes some of my electronics...
I am finding lots of good info on programing the tinyg controller. But it has the 1/8th stepper limit vs 1/32 on the CNC xpro V3. But trying to...
Because of cost I was looking at getting the same motor of nema23 175oz. I not sure the near double the cost of the 345oz touque is needed.
