Separate names with a comma.
Some features disabled for guests. Register Today.
Maybe I'm missing something, or its been asked already, Why doesn't the new Black Box X32 have 4 end stop inputs? I have other machines that use...
I'm just not finding anything out of alignment. What about the flexible coupler? could they be bent or drilled Off center? They wobble too. Could...
the lead screws came from Openbuilds. They aren't bent, or at least they weren't when I put them in. I rolled them on a flat surface and they...
Followed the video posted above. The lead screws seem tension, motors sound different everything moves smoothly and seems tight, but still have...
Thanks, ill play around with it.
Are the rapids, none cutting speed set about as fast as the leads screws can go? can they go faster?
I wondered that myself, but went ahead and ordered new endplates.
Awesome, thanks.
Was wondering if there is an upgrade kit to adopt the Lead 1515 lead screw tensioning system to the Lead 1010. Specifically the Y axes. If not,...
Adding this helped, see pic. Utilizes two of the open holes in the gantry plat and the side holes in the router mount. That reduced the push/pull...
Thanks for the suggestions, after running a few test on feeds and speed I was able to get a much smoother cut. The bit is a single flut and one of...
A lot of that I think is just bouncing around. When I carefully rotate the shaft by hand I get about a 0.08mm deflection. I have tried several...
I probably knew that but forgot to look lol. I figured its probably the laptop, was hoping someone might have a quick fix.
Next issues... (Lead 1010 with RoutER11) After installing a modified High Z mod I was squaring my RoutER11 and noticed my spindle is out by almost...
Yep, after installing my modified high Z mod. I needed to reverse the direction of the Z, wanted to connect with my shop laptop (windows 10) but...
Will check those, but all other USB devices function on that laptop. I did try other port, no go.
Thanks, for some reason I didn't see the link the first time. - however same issue.
I got one of my laptops that will not connect to the black box. "USB device not recognized" Is all I get. Device manager shows; "Unknown USB...
Finally getting around to installing the High Z mod on my 1010, however I am not using it to gain Hight, I am adding it to gain stability. I will...
Would be interesting to see what the data sheet says for the interface chip operating temp. Could be the drive itself I guess too. I haven't tried...
