Separate names with a comma.
Some features disabled for guests. Register Today.
I thought I had my speeds and feeds dialed in for HDPE. yesterday the cut was great, today it went down hill fast. Picture of the 1/8" 1 flute...
Seems the Auto-Update today corrected this, v1.0.268: Fixed cosmetic layout css issue v1.0.267: Fixed probe complete dialog, added 1% laser focus...
After looking at and trying several other suggestions, this is what I came up with. 1/8" 1 Flute HSS. Spindle Speed, 18800 (#3 on Router11...
OK, I found what is going on. When starting the prob wizard the jog automatically switches from Incremental jog to continuous jog. So not...
Well plugging in the XYZ probe hot isn't the issue. Today I plugged it in before starting up the machine. Everything was fine until I ran the...
Awesome, thanks!
Looking for advice on speeds and feeds for a clean cut on HDPE. My current settings are fairly smooth but looking to improve it. 1/8" 3 flute...
I'll have to do more testing to be sure. The Z steps seem to be ok. The material is 25.4mm and it cuts through with barly a mark on the waste...
Can the XYZ probe be plugged in hot or no? Both times I have plugged the XYZ probe in my machine manual jog will be locked to 4.33mm. Doesn't...
OK, think I got it. I played with it a bit today and realized changing the Z also effect the starting position. I will leave it at -10 for now. I...
Your the man :thumbsup: Homed yes - Post processor shows -10 on X, Y, and Z. Didn't realize I could change those.
Got my LEAD 1010 up and running. did a bunch of testing today. One thing I'm not sure about. What is the machine supposed to do once the project...
Yep, runs just fine - thanks!
Paid subscription: yes Latest version of post processing: yes but will DL it again to be sure. Where are the rapid moves listed? All I have for...
Working on a test cut for my first run on the LEAD1010. Using F360 I drew a basic block with a hole in the middle. Got my CAM set up, using the OB...
Hay thanks for that information but now I have a more pressing issue. If you can point me in The right direction. I started un packing my...
Thanks for the links! For reference, attached is a pic of what I get when importing DXF R14 (same as before) and the second is importing same...
Just received my new LEAD 1010 and getting it set up. Will be using the black box. I was looking into the Openbuilds software. The CAM generator...
Need to get the Lead 1010 but was wondering if there is a sale coming I should wait for and how long?? Can't really wait, should have ordered a...
Thanks!
