Separate names with a comma.
Some features disabled for guests. Register Today.
That is 6082 6082 aluminium alloy - Wikipedia. And i forgot to mention i take 0.2mm depth of cut dont think the flex and the dewalt 611 can take...
I've had pretty decent cuts with Kyocera endmills and Desteniytools. The 1/8" i use are these: (10) 1/8" (.1250") 2 FLUTE CARBIDE ENDMILLS - NEW -...
Yes they are awsome ,i've seen them in action on NY CNC([MEDIA]) they are great since they will not loose any stepps and will have constant...
Another question abaut the DQ542MA driver. i see it can run from 18V to 50V would it per say run better at 50V then at 24V? or its not that...
Anyone can tell me if xPro v2 can run with DQ542MA Stepper Motor Driver so i can use High Torque motors?
I think it might be ment to be used in a larger CNC with Belt Pulley(like this http://www.uniqengineers.com/images/tormach770_large05.jpg) ,not...
No i bought my motors from Openbuilds in US and the motors dont have that long cables for the way i am going to build my CNC. just wanted to make...
oh ,well does anyone know what they called? i will need them so i can extend the wires since the stock are too short and would be better to have...
May i ask what are those connectors you are using on your stepper motors?
my main reason for wanting belt reduction is i think my nema 23 wont be able to handle the weight of the 2.2kw spindle i bought ,wanted to see if...
Yes thats the way :)
i've read somewhere on here that some poeple use a square tool and clamp it down and run a router with a end mill along it taking just a 0.1mm at...
probably would be good with a 0.8kw spindle like FOUR BEARING 0.8KW WATER COOLED SPINDLE MOTOR ER11 AND INVERTER DRIVE VFD CNC | eBay I have...
Would a GT2 belt be ok too instead of GT3 for Z reduction? i cant seem to find a 40tooth GT3 pulley and the belt. 20 tooth pulley seems to be...
This loos amazing ,will have to convert my C-beam to this sometime xD acording to their site they can only put out max 2.2A per phase and that is...
Does seem like its the motors but cant really tell. You could also put a rubber sheet or a blanket under the CNC ,vibrations could be coming off...
thanks :)
check for any loose screws ,my normal cbeam did make that sound when the screws on the end plates were loose
Hey ,i saw in a post that you fit a ballscrew in the C-beam. May i ask where u got it and what size? i'm fairly new in cnc but would prefer...
I dont know abaut makercam , But fusion 360 you can edit what extension it posts to in the config file for the post process .There is probably a...
