Separate names with a comma.
Some features disabled for guests. Register Today.
I have NOT edited anything outside of the provided GRBL settings tab. Currently I use the dropdown and select "gotozero (work coord)". With...
Found it in the Fusion 360 post process, thanks. What about when hitting “go to zero” in Openbuilds Control? Can I change the order of operation...
I’ll go back to $42-2 and see what happens. Do you know if there is a setting that can be changed to have Z axis movement be last instead of...
I'm trying to setup the parking feature on my X32 and have run into an error. I changed $42 to "4" for Z axis park and I get an "error 52 -...
OK, I've narrowed this down a little more. It appears that what is happening, is the M5 command at the end of a job is not registering for...
Well, it started working "normally" again, I'll have to wait on another fault before testing. On a side note, is there a way to enable soft...
shouldn’t be wiring, I’m getting continuity when testing straight across the output, no wires connected. I’ll do some more testing in a bit and...
Version 1.3.
Control signal, it’s only making a switch.
Where can I find the version#?
I’m only using it turn my DC speed controller on/off.
It was purchased in Sept, this year, if that tells you anything. If not, I’ll look when I get back home in about 30 minutes.
Relay1 is intermittently staying closed after M5 command or after completion of a job, this doesn’t happen often but when it does, I cannot get it...
Haha, I was just looking at that and getting ready to ask about G28/30…. Looks like this will accomplish what I’m after.
Makes sense, thanks for the input!
Just to clarify, I don’t want workplace zero to be near home, rather where I set it for each work piece. I’m wanting to set the machine coordinate...
That is what I do currently, was hoping to eliminate hitting the gotozero button as it never changes in relation to “home” position. Is there not...
I’m wanting to use the homing pull off setting to set my machine at (X0, Y0) on my workspace. Currently I would need to pull off 3mm for X and 5mm...
Perfect, and as usual, thanks for the help!!
@Peter Van Der Walt can you possibly shed some light on this?
