Separate names with a comma.
Some features disabled for guests. Register Today.
Control software is open source, this means anyone can contribute. If it was not open source, this would not be the case. Just because you want a...
TBH, I don’t think FluidNC is as mature as say grblHAL currently is. Compatibility with Control aside, I found some odd issues that I couldn’t...
Good stuff! For reference, I have a ballscrew on my z axis and that runs at 400. Anyway, at least you are moving now and that should let you...
They should be 133.333 according to that. TBH, that seems a bit low, but I’m guessing your machine uses belts and has a reduction pulley setup....
I still didn’t have quite the Z accuracy that I wanted - I was seeing about 0.1mm of backlash which is very high for a ball screw. So I did some...
i intentionally bought one that uses an external resistor so i can just step down the voltage to 3v if I need to. That said, I’m going to be...
So I thought it might be fun to make a DIY Tool Setter. So I ordered a16mm metal momentary switch with a green LED ring light. My plan is to...
Thank you, this plus the delay code from @Peter Van Der Walt worked great! :thumbsup: setTimeout(function() {...
I understand your point, however when you are working on a CNC re-build and there are multiple controller power cycles and firmware rebuilds,...
LOL, I didn't think of asking AI, previously when I've tried programming questions, the results have been more miss than hit. PS, the reason I...
i couldn’t find any working delay code, I’m not a programmer so I’m the end it wasn’t very helpful.
I finally got around to designing the next iteration of my CNC machine. I was thinking of moving to a flying gantry design, but I think staying...
So I upgraded my Control board to use Wifi which works really well, however, Control still doesn't recall the last connection used. Im honestly...
Why on earth do windows laptops have such bad trackpads? Arrgh, I hate them so much! :banghead: I got so fed up with it being so consistently...
Umm, Mistakes were made, but v1 of my front cover looks pretty good … even If I stuffed up the side holes location. I need to rotate the panels...
These AB Blocks seem to be working really well so far. [MEDIA]
If anyone was wondering if my ghetto 3D printed dust separation system works, the answer is yes! This is just from my spoil board surfacing. I...
Just circling back to this discussion, now that I’m running grblHAL on my DLC32, I have an extra input I can use for a tool height setter. i just...
I finally got around to wiring up my probes, including my 3D Touch probe which has been sitting in a box for many many months. They connect with...
Cheers, that’s helpful.
