Separate names with a comma.
Some features disabled for guests. Register Today.
It's pretty simple really. I was using CNCJS on my laptop. I'll still be using it, just on the Pi. the POE hat is just so I can power it from...
And for an update.. my laptop crapped out (the one I was using to connect to the Lead. So I picked up a Raspberry Pi 3 b+ the other day and the...
Yes, in the configuration options of the openbuilds software. You can set the limits and then upload to the firmware. Takes a little trial and...
Pfft.. I always open spam.. my super rich prince of a cousin in Africa keeps trying to give me money..... And at the tender old age of 43, I need...
I'm familiar with the issue (my degree is Electrical Eng :) ) All of the low voltage wires go to the rear, high voltage to the front. They are are...
I'm having an odd problem.. Hoping someone came across it and there is a solution before I start pulling the machine wiring apart. When I turn...
This is the Internet @gdon_2003 Your post is useless without pictures :) Also a link. I have thrown togethor a couple of Fusion360 models of...
How are you guys sizing the spoilerboard.. I had to tweak the soft limits x y dimensions in the firmware as the stock values the moving parts...
I'm using the stock lead at the moment.
did my first test run, but I only had a 1/4 router bit (mortising straight cut bit).. so hello world did not quite work but the logo came out.....
I was bored.. so I threw together this quick Fusion 360 model for a spoilerboard. It is easily modifiable. Spacing for the holes is based on...
I had the same issue.
Mines currently sitting on 2 sheets of 4x4 3/4 plywood laminated on saw horses.... I'm going to have to reconsider my base table... heh.. post a...
Or dual boot and run Linux... I setup cncjs last night with the xpro v4 and it works flawlessly. But yes, you need the appropriate drivers for...
They are not quite the same. yes, the AXYZ is the same and easy enough, and the fan was not an issue either, it was the limit switches where the...
Is there one for the Xpro V4.. is it maybe in another build video?
Pictures are awesome.. nice write up.. however.. I am going to have to put in the obligatory... This thread is useless without video :)
Thanks, I actually bought the unit via ebay from a person who purchased it and never assembled it, boxes were still sealed (btw.. holy crap.....
It lives.. I'll post more on my experience later. Mechanically, assembly went mostly without a hitch, electronics on the other hand not so much....
Most multimeters have a continuity testing setting.
