Separate names with a comma.
Some features disabled for guests. Register Today.
Spindles can be whisper quiet. I have both a 500w and a Makita. They are quiet till you start cutting. Reason I would want a bigger spindle is the...
Good eye. I realize that the 200mm rails are a tad short. But to be honest there is about 40mm of travel left over after I place 2 blocks to hold...
I did some measuring in Fusion. When I measure from the bottom C Beam of the gantry to the top of the extrusion where the spoil board will sit....
Some of my parts arrived, I finished some end plates and kind of mocked build my x axis. Just to see if my layout lined up. Went together pretty...
It's not consider a mess up when you are the builder, and you catch the flaw, and fix it yourself. Well that what I tell my self.
Since we are confessing too fried drivers. I have to come clean I fried one too! Actually popped a capacitor. I think I mixed up the the 2 hots I...
WOW! I like. Ok so I was using the method of using a 90 degree chamfer bit pecking a small indent move 100mm peck another indent. Measure with...
That's awesome.
The bolt pattern looks correct 26x26mm to the center of each hole squared and 4mm bore for M4 bolt. They look good to me.
You might be right all the extra work and steel rod not going help a whole lot. So next thought is I left on back side of the c beam I left a 1/8...
I liked your idea of the dbl c beam setup. your project spurred the creative juices to start one like yours. But I didn't want to build something...
Corey Corbin published a new build: This is a upgrade to make a little deeper and a little bigger foot print for cutting. This is a copy of...
So here is a bit of a new machine I'm building. There is multiple machine builds I like so I am plugging the ideas all together for one machine....
Awesome machine! I have some questions. I was cruising your spread sheet I probably missed it but I was wondering what size spindle? And what size...
Ok looks like it works pretty good. Thanks for the video.
Also you can touch the magnet to the probe plate to see if it triggers.
Thanks for the pic I like the setup. I have been using only sheet rock screws and various chunks of aluminum to hold down work to wood spoil...
12/1/20 So I was looking in incorporating ball screws on my machine.Either way with the stock bearing blocks funky size and trying to mount to the...
It's a dance. But my recommendation is with Peter Van Der Walt, any end mill that is ZRN coated or Sharkbits diamond like coated endmill. 98% of...
I have been dreaming of a little larger cnc machine with a bigger spindle. I plan deploy your dbl c beam Idea. And using steel sheet of some...
