Separate names with a comma.
Some features disabled for guests. Register Today.
Rebuilt the y/x/a axis to install new plates and retram entire machine. Everything bolted right up and square, so I’m quite happy. Now on to the z...
New to the arena.. Wanted to add my build that I just started to get input and recommendations. I will be building a 1515 LEAD machine, with a...
Hello, Has anyone else been having problems with the OB Controller crashing randomly after the update to 1.0.276? I have had this happen...
Last plates completed tonight. Did a mock up to make sure everything worked as designed, and I’m very happy with the end results. This is the X...
Ok. So this is a thick bracket. This is the X free floating end plate. It will attach the c-beams to the uprights. Need to drill the through...
Now. That’s a nice way to tension a ball screw. Next machine specs are changing by the day. This is why I love and hate this site. LOL next...
The motor mount has Angular contact bearings in it already, well 1 angular and 1 regular. The free floating side was upgraded from regular to...
And, at 16mm thick, there isn’t a lot of whip. Even with the rotation and no tension in. But no, the fixed portion is the only part I didn’t...
New plates installed on the Y axis. Now I see how far off the original was.. I need to realign the linear rails on both sides to make it all...
New plates cut on the machine. The ones my friend made were off a bit so I remade them. Here are the plates for the Y axis. Will install after I...
Ok. Usability question. Is there a way to jog to a specific location on the interface directly? Other then jog control, I’d like to be able to...
Umm. Umm. RTFM. I didn’t RTFM. sorry...
Error will Robinson. Error received when trying to do a z probe. [ATTACH] Am I missing something? I have updated to the latest firmware.
Plugged in usb. Turned on the 24v. Plugged in the interface. Pushed reset on BB and interface, and all is up. I was able to control the system...
I’ll have to pull it apart to confirm, but it’s a newer system, and the brain board I had to replace was 2.7.
So. When I connect the usb. Everything comes up and works just fine, except the Interface can’t connect because the controller is in USB mode....
Umm. Ok. So. I made it back down to the machine today. Turn on the controller, same issue. Check the power supply. All checks good. then I...
For the X/Y plates, I am using 3/8". For the end plates on the Y/X, I have started the change over to 1/2" for the Y and 1" (Milled to 20mm) for...
No. I got the replacement brain, and I'm running off of the OB controller.
Compared to what they normally run at, it is a bit colder. I am still working on this issue, as the PS is testing good.. Not sure what the cause...
