Separate names with a comma.
Some features disabled for guests. Register Today.
A 1/8" shank is 3.175mm. Being undersized by almost 0.1mm could be significant, especially for an adapter but there is only one way to know for...
Do you not have a micrometer/digital calipers? Then you would know. I think it's one of those "must haves" for anyone using a CNC machine. I can't...
For cutting, score and snap. For etching - make a mask and sandblast. A decent sandblast cabinet is reasonably inexpensive.
Look at your G Code to see what it's trying to do. It'll take a little work to figure out if the GCode is the culprit. a spreadsheet might help....
Since there is no cost for wiring NC vs NO, why not NC? Seems like a prudent choice. I have gotten false triggers on a pause switch that was NO -...
On your limit/home switches, it doesn't really matter which pins of the switches go to the input pins (Gnd and Sig). However, if you are using...
You should be able to find all manner of arduino code for what you want. That driver you have looks to be a full bridge driver and I'm pretty sure...
The ratios are 16 (center) to 13 (planets) to 42 (planetary) This size of gear isn't good for power transmission. It's more of a novelty. If you...
Thanks. Probably not going to put anything more into my CBeam machine. I'll be moving up to something better.
If you are thinking of building one or something similar, take a look at my blog. I learned a lot in the process and it may help you avoid some of...
Planetary Gears. Fun project to build. See more here [ATTACH] and a little video... [MEDIA]
Personally, I wouldn't use a battery powered router for this. What's the run time of the battery under constant load? Can't believe it's that...
Planetary Gear set. Here's a detailed write up on it. [ATTACH] [ATTACH] [ATTACH]
I think you are asking for a display you can mount on the machine that shows RPM. There are BLDC controllers with a built in tach but I don't...
Better to get your Post processing in order to avoid generating the offending op codes. With grbl panel you can hit continue to get past an...
