Separate names with a comma.
Some features disabled for guests. Register Today.
I realized that I didn't fully answer your question... I'm using a Makita router, with 3D printed inserts to reduce the ID of the Openbuilds 71...
It is worse toward the center, but this is also as the cut progresses. However it's just in that one direction. At the same X location, but...
Thanks. I may need to double check the stop collars, which I think means that I'll need to disassemble the X gantry.
Thank you for the reply. I checked this, and found everything to be as square as my eyes (aging) are able to detect. However, I did not surface...
I recently increased the Z-height of my C-beam XL. I found that the limited clearance was making some projects difficult, and others not possible....
Does anyone know of a guide for machine maintenance? I have a C-Beam XL and I'd be interested to know what others do in regard to cleaning,...
Thank you. Downloaded and installed v1.0.251, and it works great. =)
Is there a way to revert to a prior release of the Openbuilds Control? I updated to v1.0.258, and now the software lags, won't run a job (I click...
That's great, my sincere thanks for the thoughtful analysis. It makes sense and I will change the switches on the drivers to apply greater power....
Thank you for the reply. I used the materials from the C-bean XL bundle to build the machine. The motors are nema 23's with the inscription of 1.8...
Thanks for the reply. The change in z-height seems to occur during the cutting operation. Here's my workflow - I'll set z-zero on a piece of...
I have a C-beam XL that I have been using for various projects, some of which have me milling HDPE. I've noticed that the z-height seems to be...
I didn't know that was available, thank you.
Thanks for the info.
Hello to everyone, Is there a way to do a tool change when using the Openbuilds Control software? I have a C-Beam XL with a Makita router, and...
After squaring and tightening the gantry, I did a small surfacing test to check the position of the router relative to the spoilboard. After a...
Hi Alex, thank you for the reply. I imagine that was the problem. After looking at the base of the beam for the left gantry, I found that it...
Hello, I ran a surfacing operation on my C-beam XL, and it seems that I have some adjusting to do. I used the Openbuilds Control surfacing...
That's great. I ordered them and they will be arriving today. Thanks @Kyo Just to clarify...do I need to hook up to both the 5V and the ground?...
Now that I'm finally in the wiring stages of my build, I realized that I have another question...How are the connections that go to the 5V or...
