Separate names with a comma.
Some features disabled for guests. Register Today.
Unfortunately you are going to get a wide range of responses. I would think the 1st question for you to answer is what is the expected use of your...
I will take some pics tonight of how I mounted mine.
CNCMD submitted a new resource: Temco Limit Switches - Limit Switch Upgrade I wanted to have more robust limit switches on my machine. Been...
I wanted to have more robust limit switches on my machine. Been through way too many of the micro ones which required tapping the small holes in...
Thanks, I'm very content with these. Very solid construction. $20 for 3 of them. All metal construction. I was able to mount them without any...
Here is what they look like. [ATTACH]
Well as usual keep us posted. Tonight I upgraded all my limit switches to much more beefy Temco Brand ones, that have an adjustable arm. The...
I did some searching the web, and found out good info, but just not the answer to that question. It will even sense aluminum, just at a much...
Do you know if the positioning of the sensor has to be a certain way, meaning, does it work if the axis approaches from the side of the sensor,...
Let me know how they work out. The Z axis seems impossible to find a mounting location.
I keep thinking about changing my limit switches but right now I'm using standard temco limit switches, they are a bit better quality than most.
Now you're cooking! I'm trying to get my VFD hooked up to my controller tonight. Almost got it!
You need to do way more research. Your link is to a 2.2KW Spindle. This is far from "small". It's actually the complete opposite. You would need a...
I'm assuming you are using grbl, it looks like you need to adjust GRBL setting for travel direction and homing direction. You should determine the...
Home is where ever you want it to be. Now with that said, Z Home should be Up to the Top of Z Travel. This avoids your bit running into the...
Thanks, currently only running a 800watt spindle so the neighbors are fine....lol...
You're very welcome. I would like to add something that I am not entirely sure of, but some controllers are able to "look forward", meaning if it...
You have soft limits enabled. More than likely your max travel on one of the axis is more than what is listed above, more than likely the Z. I...
Michael you're correct in what you're thinking. With the dual Y axis you can have misalignment that will cause binding. Since your rails are on...
It's really your decision on the matter. NO = In the event that you have a wire/connection go bad the system will not trip, however, the next...
