Separate names with a comma.
Some features disabled for guests. Register Today.
@ mrarmyant: you won't find 10 mm screws in 48" lengths, simply because the span is too big for the diameter. for the kind of span you need, try...
on a non technical note, she loves to sing, especially when doing circles.
youtube link below: [MEDIA]
I did a sort of preliminary calibration of the axis except the extruder, but you are right, i should fine tune those numbers. regarding the...
this here pic is taken after the printing of the delaminated part. one can see it under the extruder. [ATTACH] ..and below is the second...
thank you, will look into that.
will try 210 c. thank you, sir.
i almost hate you for those awesome led lights. regarding the printed part, have the same delamination on my first successful print. [ATTACH]...
Hi Steven, I believe you have to return the parts to the store, there is a link for that in parts store, if you have an account. For that, you...
s i also connected mines in parallel. trying to connect them in series and frying a couple of m542t stepper drivers was the main reason.
also, can't wait to see the extruder mounted on it. edit: never mind that, i missed the extruder in the last pic. my bad.
did you connect the y motors in series or parallel?
indeed, i used the shrink as a sleeve, and pulled it over both legs from the open end, then onto the thermistor itself, so both legs, or lead...
uh, just enclosed the thermistors in 3/16 shrink wrap. and since the lead wires are about 1 3/4" long and the cork it's going to go into is only 1...
i think i will enclose the thermistors i have in a little plastic tube, and run the lead wires down thru one inch of the cork insulation...
hi justin, i'm hoping to find some small coin shaped thermistors, i have 8 pass holes, 10 mm diameter each, cut into the silicone pad especially...
speaking of glass, does anybody know where i could find some flat and round thermistors? the diameter would have to be around 5 mm max, to fit the...
well, if my math is any good, glass density is 2500 kg/m^3 my glass is 1332x1170 mm, 12 mm thick, which means a volume of 0.0187 m^3. multiplying...
glass weighs around 90 lbs. platform is calculated for about 550 pounds, and each lead screw is good for about 250 lbs. it runs great, the frame...
well, glass came as promised, better post some pics before that beer bottle becomes a 12 pack. ***, after a hard day of work... [ATTACH]...
