Separate names with a comma.
Some features disabled for guests. Register Today.
What are you using to produce G-Code?
Sounds like your wheels are OK. Are you climb cutting or conventional cutting or using a mix? What feed speeds are you using? What depth of cut...
I will mount mine off the machine in some sort of enclosure.
I once had an issue like that and the Z would kind of jam into place and then break free under certain cutting loads. It was frustrating to track...
If your x and y are all in order that only leaves z left. Give it a yank and see whats loose sir.
If you steps per mm were off they would be off for everything. Your **** would just come out the wrong size. Start at your bit and trace...
Try just drawing a few circles of known size. Do some squares as well. Some a something like 2", 3" ,4",5" and see how they come out.
Might be your font my brotha
Try the same file but rotate so it cuts along the Y.
Looks to be identical in all the attempts? Are you having issues with other cut files? Backlash usually doesnt repeat identically over and over...
The Shapeoko Forum • View topic - Cut2D post processor for grbl?
Hey Kyo...nice router shim!!! Ha ha ha. You said it hits the mounting angle brackets some where. Do I need to update or is it workable as is?
Couple easy things to check before spending $$$. Cut some small squares and circles. Reduce step down and cutting speed. Try one run with climb...
You can cut with 16k check out the feed and speed calc in the resources on the open build site. 1/8" single flute has very manageable cutting...
Not something you really want to use. Will just cause you headaches and possible damage to your Router.
Single flute at those RPM and would ideally be 1/8" bit to keep your s speeds and feeds inline.
How about a cad file that allows us to cut that out of a single piece of aluminum? :}
Looks good. Only thing you will want to do is make sure your bolts are lower than you bits rapid travel heights. Otherwise you may crash your z,...
When I ordered mine I started thinking about all sorts of ways to improve it but decided to just go with the standard kit and them see what if...
I bought a Dewalt DWP611. Less complicated than a Chinese spindle set up...at least to me anyway. Also have a SuperPid on the way which I'm...
