Separate names with a comma.
Some features disabled for guests. Register Today.
used WD-40, did not seem to help ...
I tried milling Aluminum with 1/8" mill at thickness from 0.1 to 0.5 mm and speed from 10 mm to 200 mm, no joy! See previous post ... could be 24v...
Just spend 4 hours trying to find right combination to mill 1/8" think aluminum sheet to make some brackets. End result, think I will use Garlite!...
Suggest you refer to picture in Step 8 of Routy Build ... seems to have the important ones.
Vic, I left the micro-stepping set to the default of 8, did not play around with it. Cutting garlite works good with setting in the OX plate...
I used 1/4 inch rod and these bearing from the parts store R4-ZZ Ball Bearing - 5/8" x 1/4" x .196"
I am planning to let my Routy grow into an OX! Appreciate any comments on the following: When I built my Routy, I already made it 480 mm wide, so...
You can look at the TinyG site for info on power supplies, motors, etc. https://github.com/synthetos/TinyG/wiki/TinyG-Start For some general info...
Thanks ... sounds like it is not a good idea to explode components when using SketchUcam ... Seems if it is a circle or arc in memory, when I...
So after I make a circle in Sketchup, when does it get made into segments? And will it get made back into segments even if I convert it to an 360...
Thanks for the instructions ... strange an arc is and arc, but a circle is segmented, I did not realize this and your help here is appreciated!
I felt I need to get a more solid mount before I could do much at all, tool was getting pushed around some ... not too worried about truing Z-axis...
Both places look good, especially for detail work. See attached files for my first Routy cutting of garlite for holder for my Dremel tool. Much...
Thanks for this link ... lot of interesting things to spend money on here!
Yes, that or the bit is not the right one for plywood. It seems to me the base of the Routy is robust enough to take stronger motors with revised...
With certain plastic nuts, lubrication is not needed ... I found out yesterday garlite cuts easier than plywood, at least with 1/16" Dremel tile...
By the way, seems Mark and most people now though are recommending an 8 mm screw ... for a bit more heft.
There was some info about this in earlier emails that I followed ... here is what I ordered. I modified the Flange Nut into a wood block ... note...
I currently have it working with a gShield v5 (by synthetos, website says it will be back in stock mid-February ) on an Arduino U3. Loading...
