Separate names with a comma.
Some features disabled for guests. Register Today.
Some of the information required by the calculator that you posted is confusing to me. For instance what is chip load per tooth? How do you find...
I used electrical conduit pipe straps to hold mine on the z axis. It is the most rigid I have found thus far. See page 17 of forum for the post.
I will give it a shot. The bit I was using was a general metric titanium bit. I can post a video of the fail later so you can see what happened,...
I'll second that. I'm working with acrylic now and if you plan to cut it with a dremel then plan for it to melt a little around the bit. One tip...
Is 1500mm/min the top speed of routy? Only thing I have tried is around 200 thus far. I want to run it now but machine is down for repairs...
Just a quick one for anyone mounting a dremel tool. I found a better way to mount it and lock it down super tight. Home Depot or Lowes carries...
Thanks @JustinTime gives me a good idea of how I will hook it up to the machine I have here. Thanks for giving me a preview of what I'll be...
@Chris Allen and @JustinTime Just curious how you guys attached your Cable Drag Chain's to your machines. Is it resting on something? Got any...
The cut depth was set to 0.0762mm same as @The Dude suggested for acrylic. Since it was my first real cut wasn't sure what to expect so I set it...
Better brackets just arrived :thumbsup:. Anyone cut 3/4 in MDF before? If so what were your settings. Settings on todays cut were the acrylic...
Very nice, thanks for the info. Glad to hear you have had good success with those settings. When the time comes I will use them, hopefully this...
In case you don't have a network connection attached close to your mill like me, I created a little xls file with Krams info in it. There are 2...
Let me know how that goes for you. I would be very interested in the settings you used for acrylic if your planning on cutting that. I had a look...
David, Thanks for all the info will have plenty of reading to do now. I'm getting ready for my first cut and I will be cutting foam first to test...
I am using the grbl controller version 3.5. I grabbed the source code my version is using and also the 3.51 version to have a look and G64 is not...
That was fast! It was the motors that I used. A friend of mine happened to have 4 stepper motors at work that he gave to me and they don't all...
David, Thanks for the tip. First thing I did after getting my spoiler in place today was to draw some text. Then I read your post and followed...
I still have yet to cut anything as well. I keep tuning my machine and since baby is asleep at night :sleepy: I don't want to stand the chance of...
Its ALIVE!!!! ALIVE!!!! Such a sweet sound steppers spinning. Thank you very much Robert :thumbsup::thumbsup: you totally unstuck me on that...
Just got back from the trip and thought I would post my results. I tried to upload my hex file but I'm not sure it is working or if it even...
