Separate names with a comma.
Some features disabled for guests. Register Today.
+1 - Auto bed leveling. Works fabulously on my C-Bot. +5 - S3D. I wasn't sure on it either, everyone kept raving about it. Now having used it for...
1.5 lbs! I wanted this to have some heft, which it will have since it's going to take almost the entire spool. But it's for mothers day... :)
I use OBS with a C920 camera, then have a couple of window captures for Octoprint and S3D, finally a text object for the link for the current...
Started up another big print. Playing around setting up an auto live stream for the printer. If anyone's curious here is the feed. Suggestions...
Thanks! I had it at 72.3 in the generator, which was throwing off the duct design. It's all fixed up and moving forward again.
I believe the dimensions where changed recently to increase the size of the frame. So depending on when you pulled your design and where you...
I've done this with my probe and with the default frame size, you will loose some printable Y dimensions. I believe it was around 30mm of Y loss....
Anyone with an E3d V6 w/ volcano, can you verify the distance from the top of your v6, the aluminum top, not the ptfe tube holder to the tip of...
Right on, I look forward to seeing that. I did a similar mod to mine when I built it a few weeks back as well. I moved the probe to the right of...
I'd gladly take your help with the generator if you want to poke around and add stuff. Just need git, some acceptance that the code is not pretty...
FWIW - I use a YL-99 switch modded to be NC on the hotend carriage for min. Still has it's LED, which is on when powered and off when triggered....
@TechGirl - Definitely! :) Should I use your mount as a template? I would need any clearances required for the mount and BLTouch as well....
Ha! I didn't even realize I had said cycles.... It's been a part of my vernacular for so long. :) On a side note, I started making updates to the...
I've thought about doing this as well. I think it would be great and make it easy to have something like this build custom designs for the entire...
Right on. :) re: Fan Duct author. My goof, missed that. @AKeric, do you have any knowledge of OpenSCAD by chance?
Looks great. I've been trying to do this type of duct for months, on and off, in OpenSCAD... Have any knowledge of OpenSCAD by chance? :)
I've no experience with conductive filaments. From what I've read, they require a hardened nozzle and are hard to purge. It would be very cool to...
It appears I am not alone by a long shot in using the 300x300 12v heated bed. Nor the RGB LEDs. I am wondering if anyone else would be interested...
I'd be interested in the scad file and if you don't mind I will incorporate it into my generator for both prusa and c-bot carriages. :) Chris
I did the same, but did the 600M so I had fewer cables hanging out and can tap what lines I want easier by buying the ends vs cutting the lines...
