Separate names with a comma.
Some features disabled for guests. Register Today.
Will be interesting to see how it prints: I'm starting to notice the shake on mine, with the toolhead that high up there (based on my 2' build...
@Elmo Clarity : I may have gone too big on the fans, but I figured I don't have to drive them at full power. May as well have a big gas pedal if...
@craftygeek, as far as fans go for filament cooling, I'd picked up a pair of generic 40mm ones... I'm guessing they put out 4cfm each. But since...
Just an update: First 'really big' print. 20" tall, 11" diameter, just over 3 hours with the 1mm Volcano nozzle @ 500 micron. [ATTACH]...
I am experiencing some bounce... I'm just getting started with this thing so I can't say yet how bad it is. Once thing I've been thinking about...
For what its worth, my build platform ain't goin' nowhere on its own accord: It spins freely when the steppers are idle (I can adjust it by...
Here's some pics of my nearly finished bot: I got the final wiring complete this weekend. Other than a tray for the power supply and a case for...
@CapnBry : I had a similar issue mounting the z-steppers, although in my case one washer was enough to pick up the slack. Maybe you can just add...
Had to share my first print... a 1cm calibration cube: [MEDIA] That's a 1mm volcano nozzle printing at 500micron layer height. It 'just worked' on...
I just made a picture of these (as part of my blog), see attached:
Great stuff @sheffdog !
Just an FYI: I modified Marlin to support the "Z_DUAL_STEPPER_DRIVERS", and plugged my other A4988 driver into the Extruder2 block (Rumba...
Thanks guys: I realize this issue is Rumba specific, and not something directly related to this thread. I'll poke around in other forums and if...
My bed is 12x12, the same as @sheffdog, and he has no issues with this same setup (his printer and mine are the exact same, other than mine is...
@Carl Feniak : Glad you like the blog ;) Thanks for the info on loosening stuff (and the screws are oiled). I was actually thinking about...
That's what I figured was happening too. "What you need to do is run a second driver as a slave to the first one so each motor can get all the...
Question to the community: I'm building a 12x12x24" version of this bot: Making great progress, all the hardware is built, I'm currently setting...
Just wanted to say thanks for the replies on my build build volume questions. I've pulled the trigger and ordered all the parts. I'll probably...
Time to stop lurking I suppose, been following this thread for a while: I'm friends with sheffdog, and seeing his success has inspired me to...