Separate names with a comma.
Some features disabled for guests. Register Today.
Martin, did you have a reason to build the spoil board this way? Are you going to use the V-slots for hold down clamps? I would have not done it...
I wonder what will happen if you flip one of the two parts over and than try to mate them.
Yeah, I think thems the one I have, the 1605. I want to cut at higher speeds, >2540mm/min. As long as the bit can handle it my stepper are...
Why don't you just put the bit that you want to use to cut the part into the spindle, raise the Z axis as high as possible and measure the space...
Eric, plywood flexes and bows. Supporting it only on the outer edges, on a span of, let's say 4', is not enough. So do the aluminum extrusion,...
I would do it like this. I would cut out the rudder and get it to the final outside cuts shape. Then I'll round over the leading edge of the...
Yeah, my bad, I meant 2540mm per minute and not per second. My Z is only 10mm ball screw and can run much faster too since the length of the...
I think the conventional wisdom is that the diode wattage given by the sellers/manufactures are very exaggerated. Most likely your 20W diode is...
Just yesterday I used the wizard to flatten my sacrifice board. I used a 25.4mm flattening bit. I set the 0 X and Y just before they touched the...
Make sure your USB cable is a cable that can also transfer data. Some/many cables are only for charging and cannot transmit data and then the...
@Shannon Tolliver what speeds are you using on your X & Y? I have 16mm ball screws and I fill the whip when I go at around 2540mm/sec and higher....
Actually I meant running grbl, not grblHAL, on the Teensy 4.xx
LOL!!! For the kicks I googled the term 'how to use cable chains' and I got...are you ready...pages and pages on how to install snow chains on...
I wonder if migrating to a Teensy 4.xx will solve the memory problem.
The fan is in the units themselves. Having a fan in the box will not contribute much. If you make some holes in the top and bottom convection will...
To get better accuracy when I calibrate I use the nearly max distance I can on my machine. The longer the calibration distance the better the...
