Separate names with a comma.
Some features disabled for guests. Register Today.
Corey, what kind of a clearance on the Z axis are you anticipating?
When I saw the picture with the bearings my first thought was 'it would be ideal to have it made for thrust bearings but I guess he doesn't need...
50mm may crash but 5mm may not. My 3d printer always goes up 5mm before homing X & Y.
You sure the rail is 40mmx40mm? It sound more like it's the carriage that rides on the rail. If the rail is 40mm wide it may help with the twist...
I too like bigger buttons and I've asked already to have the jog options bigger but the Stop Button is for me not a thing. If I have an emergency,...
Yeah, I didn't think of the twist. I was thinking of the bending/sagging of the beam. Now it make sense.
OK, Rob, now I know for sure that you have stocks in the screw factory. :) I wonder why you decided to put the two steel beams that way. I would...
Welcome to the club. :) I have my X axis stepper mounted with only three bolts with no problems. I did this to have access to the coupling...
You are correct which is why I had written in prentices 'unless it's a different gap along the beam' since that will indicate a twist in the...
What is a 'docker container'? I use the RPi 3B with a Teensy. I 3d printed a case the holds both and has the fan for the RPi mounted to the case....
If we are in a confessional mode I'll join too. Forgive me father because I have sinned. I connected the 36V positive to the negative and the...
I don't know what the problem is but something doesn't sound right. 30° is half the normal travel of a servo in on direction! Yours does it as in...
Fritz, maybe you should use two different bits. One to do the fine cutting and one to do the bottom surfacing since the 1/8" bit is not really the...
Logan, that gap is not that important (unless it's a different gap along the beam). It's important that the gantry that moved along these two...
A DRO is a Digital Read Out. It's where you see the number change when you move an axis. For Calibration, just google 'calibrating a cnc' and if...
I had used Control and moved to bCNC. I haven't used bCNC much at all, just surface skimmed it, so far. My first impression is: Hats up to @Peter...
After much trial and tribulations, I was finally able to run bCNC on my RPi 3B+ and the Teensy 4.1 using grblHAL. All the problems I had were the...
I know, using a dial indicator is more precise, and I have one but I didn't use it for my tramming. I used a square and a strait rod. I clamped...
I'm not trying to go into a pis***g match but I'll tell you what I did. First, I use a tape, that I bought at a Dollar Tree for a buck that has...
In your OP you said you are using the "Openbuilds calibration wizard". That wizard will do any distance that you want. You just have to entre the...
