Separate names with a comma.
Some features disabled for guests. Register Today.
I found that importing .stl files into Fusion360 they are 10 times the original size. I use the Scale feature to select the imported model and...
Don't they have a screw on the side to adjust the slope?
Yes, you can find many different sizes on AliExpress. Just search for 'closed loop timing belt'.
Kelly, why did you use a timing belt and why is it so long? Is it feeding two ball screws?
Sam, is the CO2 tube mounted on the gantry and goes along for the ride when the
Try to get SketchUp 2017. There are places where you can get the old versions. Just search it. Once you have it, it doesn't expire. Then search...
Can you not take a look at OpenBuilds Control that Peter Van Der Walt wrote and see if you can adapt/modify it to your liking and than post it as...
I use GRBL on my machine. I have two Y axis steppers. I have both drivers connected to the same Step and Direction pins on the Nano3. It works for...
Don't overthink it. Just use the whole mm and disregard the fraction. On a run of 1100mm, or more, the error of a fraction is so small it's not...
Looks very sturdy, Jim! :duh: :duh: This design is not used very often in the router world but rather in the 3d printing world since it needs a...
I have the same VFD. I had just hooked up the 110V to it and connected the three wires that go to the spindle. My spindle is similar to yours. I...
For SketchUp or Fusion360?
But you still end up with a body that is comprised of many triangles. You now have to try to erase them, not always successful, in order to be...
Which is why I love SketchUcam. When I import a .dxf into SketchUp I go over all the arcs/circles and if they are not true arcs/circles, I redraw...
You print once the original .stl file that Keith posted. After that you flip/mirror it in the slicer software, as Keith suggested, and reprint....
PhlatPrinter MK 3
That looks excellently done! :thumbsup: :thumbsup:
Thanks for the post. I saw the link to the extruder and I may look deeper into it. It looks small and light. I also like the touch screen setup....
You sure X is homing away? It should home to the front left. X0 Y0 should be at the bottom left corner.
Lots of snow in your shop! You must be living in Canada! :D :D :D