Separate names with a comma.
Some features disabled for guests. Register Today.
I have no problem posting the file, the issue is I can't design in Sketchup... :) I'll post the DXF I used to cut it, if someone could convert it...
Thanks Mark.. It's a tight fit in those little carriages, I tested one by installing it in a carriage and giving the belt a good pull. The...
Hi there and Welcome.... Follow this link to the first post in the discussion for the Ox, there is a list of people who can supply the plates.....
Thanks for the links and options.... I think though $99.00 for a drilled, hardened, 36" long piece of v rail is a bit steep, and 51.00 for a...
I thought about that, or teeing off my vacuum collector line and making a nozzle to keep the slot clear... After making a prototype with 3/4"+...
You are correct, running the wheels in the V slot would be the easier solution. But then you have to make thick wheel spacers (over 3/4") which...
Sorry about that Karl, I got sidetracked, the files have been posted in the files section. These plates are for 2080 Y extrusions, 5010 X beam...
That's a good price from Grainger. I was thinking of trying the same thing with the steel on top and the delrin or what I have left of the Xtreme...
Yep, that would be just fine for this application... The gantry with everything on it for the F-117 probably weighs between 30-40lbs, the gantry...
Not sure what video you're referring to Gray, the Openrail and wheels are used in pretty much what would be a normal type of setup. My Joe's Evo...
Thanks Mark ! Gerald
Hytech2k published a new build: Mega-Maker Rapid Prototype Machine Portable Multi-tool rapid prototyping machine capable of laser engraving, 3D...
Thanks Mark !! If you need a beta tester sign me up.... :)
Good question, i'm just not sure.... I'll look closer into the measurements tonight and might have a better answer later on.....
I noticed a few bad ones when I tore apart the gantry back in march, some had a notchy/crunchy feel to them. I have some spare bearings here so...
I'm just putting the delrin wheels on as a temp solutions, I have a feeling there will be too much flex for me, I could be wrong, but i'm going to...
The machine he has setup has a spindle and a laser mounted to it, so he carves a shallow 3D relief first then goes back over it with the laser to...
Just received my order of delrin wheels yesterday, i'm going to get them installed and take them for a test drive.... Hopefully any flex will be...
Thanks Mark, just spit balling different ideas..... I found a supplier for both harden steel and hardened aluminum rack so I my try one of those...
I appreciate it Mark... I don't think the spindle really contributed much to it, it's only a pound heavier than the 611 that was on here. I think...
