Separate names with a comma.
Some features disabled for guests. Register Today.
The BOM probably needs to be gone through. I am using 2080 for Y axis extrusions and 5010 for the X axis... I am currently still using the 14.5...
Thats an excellent idea, Mag-Lev Ox.....
I was also thinking you could T off the existing vacuum hose for the shoe and run a 1 in hose to either side to a mount that would run along the...
LOL your right about that, good thing is though I can take the whole gantry off in one piece in about 15-20 minutes, and replace the lower wheels,...
You might be right but steel pre drilled hardened V rail is expensive, i'd rather take that chance and save quite a bit of $$ and if the problem...
Can't without making spacers due to the design and using a R&P system, plus then I go back to the whole debris getting under the wheels again...
All the wheels are running on Openrail, the wheels on the X are in good shape but they carry a fraction of the load that the Y rail ones do.......
No, I understand completely, the V rail is always trying to split the wheel, the forces are concentrated on the very thin part in the center of...
Yeah let me know what you find out, i'm rather bummed this happened but i'm looking for alternatives now. I ordered some delrin wheels to keep me...
UPDATE 6/19/2015 It's been quite some time since i've posted an update and i apologize for that, my sign business has never let up. The F-117 CNC...
My guess is the trim pots need adjusting but I don't have any experience with this board... Might want to shoot out a email over here:...
I have that same BOB in my CNC Router Parts Nema 23 Plug and Play box... What was told to me was to use Port # 1 for both step port and dir port...
That was my plan all along to use a DAC or MA3 encoder. Thats why in the controller thread over there I was trying to find out if you could do...
No sweat, I keep trying new bits all the time. I'll update when I try something new...
I guess i'm not sure if Picengrave will generate a M106 S# for the ramps board. I have looked through all the info over on JTechPhotonics site...
Ah see, I don't use hold downs, I find they get in the way alot of times for me.... The way I figure it if I go through 1 $30 bit every 6-12...
I'm usually pretty good about it, every once in awhile, mostly when i'm a hurry, one gets to close.... It happens... :) Gerald
It has, I was planning on growing a CNC supply website in the "slow time" but it hasn't let off. We are still moving in that direction and are...
Sorry but the website will be down for a bit longer, we're revamping our business now and making room for it in the near future. I can cut you a...
lol nice.... I was looking into that nail gun that shoots thin plastic nail just for this purpose but it too expensive. I hit a screw maybe once...
