Separate names with a comma.
Some features disabled for guests. Register Today.
I'm not sure what you're hoping to see in a video, but I made a video of my 300x300x300 C-Bot printing with a direct drive extruder with a lighter...
Oh yes they are flanged bearings, F608Z. I wouldn't recommend pillow blocks, they're not designed to rotate axially. Well I guess 608 bearings...
Here's the EAGLE 6.6 file, along with a text BOM file, OpenSCAD source, and compiled firmware hex file. You'll need to print out one of the...
Sorry I forgot to reply! The GT2-40 gear is held on to the lead screw by the set screw in the gear itself. The fit of the gear on the lead screw...
I think I only have the bare circuit boards (no parts) so you'll have to source the parts, assemble, and have an ISP programmer to make it all...
I got mine from this seller on eBay for $41 shipped. I was worried about it being bent but it was packed well for shipment and seems to be wicked...
I created my a differential IR sensor by completely copying the one for sale on Filastruder designed by David Crocker (dc42). They were $47 each...
I use PID on my "Fotek" SSR-powered 300x300 750W AC heated bed with a Smoothieboard and it never even gets slightly warm. Nice thing about...
Ah. I tried playing around with the project tool and couldn't get exactly what I wanted to happen. I imported the model into Fusion 360 and it was...
I use an MK8 gear in my direct drive, however there is a massive amount of variation in MK8 gears available online. I went through 3 or 4 of them...
My setup works great! I get decent repeatability in my configuration with the two side leadscrews driven by one motor, but there may be some...
Yeah I've done a lot of PETG printing recently because it looks so cool and doesn't warp as easily. I had a ton of problems up front like you...
I thought you might all get a kick of out of this-- when things go catastrophically wrong. I was printing a HeaterMeter case on my C-Bot in PETG...
I got the shims from openbuilds when I was buying the rest of the parts to build my C-Bot. 3D printed ones would be fine though. The GT2-40Ts I...
The standard flanged 8mm axle bearing, F608ZZ. The set screws on the GT2-40T gear prevent the leadscrew from passing through the bearing. Also in...
Yeah the bearing just sits in there under the weight of the bed pressing down on it. I've printed at least hundred hours on this thing and they're...
Oh sure. Both in here, but may need to be repaired because I just exported them.
Yes I am sorry I did mean Z lead screws not motors. The two Z lead screws one on the center back, one center front, then the Z motor either on the...
I've never heard of babystepping but this is pretty sweet. I am always messing with my Z height on my old i3 which for some reason seems to vary...
Thanks for finding my post for me! I have been out of town for a week so I had lots of posts to look over. If you have any questions about my...