Separate names with a comma.
Some features disabled for guests. Register Today.
The shop teacher got some stuff to connect the hood under the platform to one shop vac and connect a hose at the back of the machine to another...
Order 1600mm lead screws and flip the end plates around so that the bearings and collars are outside instead of inside. This should reduce lead...
Try this store: 8mm T8x8 Lead Screw Trapezoidal ACME w/ Brass Nut - Custom Cut Length (up to 2000mm) Rick 2.0 referred me to the store. I would...
The spindle is Porter-Cable PC690 router that is 3-1/2" in diameter. Mounting the hood under the platform removed wood dust from inside the...
The CNC router is mounted on a thick board below the front clear door. After someone removed a steel plate from the board to remove as much wood...
I mounted T-tracks on both sides of the spoil board area for the clamp boards.
The CNC router at the program for mentally-handicapped people is enclosed in a large cabinet. There is a vacuum hose near the router motor where...
Will Dual axis homing work on CNC XPro V3 board with external stepper motor drivers? I have dual motors on Y-Axis.
I have a PC 690 router that doesn't have speed control mounted in a CNC router at the program for mentally- handicapped people. Is there good...
1.0.204 had too small text box, about 1/3 of full width. I updated to 1.0.205 and the textbox is now full width. I forgot to take screenshot...
I got an E-Mail from http://support.openbuilds.com/support/home saying: Hi Jeffrey, Thank you for your feedback. I will pass it on to our Building Team....
You must have fixed the problem in build 1.0.205. After updating, the text box is now full width.
The textbox with the "DOS" prompt for entering GRBL commands below the Serial Console window.
The input box for entering GRBL commands is too small.
Peter, I sent an E-Mail message to http://support.openbuilds.com/support/home asking them if I can order custom-length lead screws and they said no.
I think that OpenBuilds should sell longer lead screws so that the bearings and lock collars are outside the end plates.
Are there stores in USA that sell 1100mm Tr8*8-2p (4 starts) lead screws?
I found out that one of the lead screws on one of the Y-AXIS were whipping on my modified LEAD CNC. How can I fix this problem? I'm not sure if I...
Is it possible modify the software so that 100mm travel distance can't be used on the Z-Axis? I broke a few bits because of the 100mm travel distance.
Is the 110/220 switch set to correct voltage for your country?
