Separate names with a comma.
Some features disabled for guests. Register Today.
I think that NEMA 23 stepper motors require external stepper drivers.
I built a circle sanding jig similar to the one shown at Sanding Jig for Circles
Giarc, The problem is that two pieces have "spokes" and two pieces have "whitewalls". The "whitewall" pieces are glued on top of the "spokes"...
The wheels are made of six pieces of 1/8" thick plywood glued together. I have a Ridgit Oscillating Edge Belt / Spindle Sander but I don't have a...
The wheels are 2.5" in diameter. They are for a model car that I bought from MakeCNC.
I tried to use a drill press and some kind of sandpaper file (sandpaper cemented to steel plate) to true up wheels for model cars but I did...
I ordered the 1/8" collet from Elaire Corporation - Porter Cable Collets
I need long 1/8" router bits with 1/4" shanks because I was asked to cut out a sign from 3/4" MDF board. Regular 1/8" router bits with 1/4" shanks...
What about PVC expanded sheets?
I usually use 3mm and 6mm plywood to make model cars. I know that there are different kinds of plastic but I don't know which kind of plastic can...
I have been using Baltic Birch plywood from Woodcraft for model cars but I get rough cuts and broken layers (?). I use good router bits from Tools...
I found out that VCarve 10.0 is released. Should I upgrade from VCarve Desktop 9.5 to VCarve Desktop 10 for $90 or to VCarve 10 Pro for $350? My...
I made some test cuts and found out that the slots are too short for tabs. I have to draw lines in center of rectangles and delete the rectangles....
I lied to VCarve Desktop that I'm using 2.9mm bit and after generating the toolpath, all the slots show up on the preview window.
I downloaded drawings for a model car that uses tab and slot construction. I have VCarve Desktop software and when generating tool paths, the...
I read the manual for an VFD and got confused on setting up the VFD. Most VFDs require 220V and both my house and the woodworking shop have 110V...
I know that there are two kinds of spindles with VFDs - air-cooled and water-cooled. Water-cooled spindles could be too much trouble because water...
The router on the CNC machine at the program for mentally-handicapped people won't run when I turn it on. I checked the brushes and found one...
I think that punching the shaft may bend the shaft.
2 spiral flutes on both 1/8" and 1/4" bits with 1/4" shanks.
