Separate names with a comma.
Some features disabled for guests. Register Today.
dont forget to order longer m5 screws to compensate for the added plate thickness.
This information you have provided From the wiki is directed towards power supply selection. This has nothing to do with the amount of amperage...
You should run those motors in a reduced amperage mode. It's my understanding that you could fry the board if you try to draw more amperage...
The only thing I've bought from there that's still working after 90 days is my dust collector and air compressor. Everything else has broken after...
Interesting read here. Assist to Get Rid of sv.symcd.com popups - Free Guide
"Started by tapping the 5mm holes. I used a tap bought at Harbor Freight and it bent while tapping the extrusion. Lesson: buy quality tools."...
This will be more than capable as long as your stepper motors are rated for less than 1.75A RMS. More than that could fry the driver chips. I...
There's known issues using a 64bit Windows version with a parallel port. Reinstall Windows with 32-bit version. That tutorial will show you...
Its most likely a 32 bit version on windows 10. It may work as you say, Im not sure. I prefer my winxp :) If you like windows 10 there are ways...
My suggestion is to keep the older pc up and running. Wipe the hard drive and reinstall a fresh copy of windows xp. disable any services that mach...
Mach 3 doesnt work with 64Bit versions of windows if you're using a paralell port device. 64 bit versions of windows require you to use an...
Thanks, They were quick to solve the problem.
Rub a little lube on the underside of it. It should go right up after that.
What if you take a few thou off the spoil board with the pattern you're cutting, so you know where to apply the Ca glue and tape more effectively....
https://www.amazon.com/Polyken-Multi-Purpose-Double-Coated-Carpet/dp/B00HMDG28C/ This one is a bit cheaper and less tacky
I apologize for the confusion. https://www.amazon.com/Polyken-Premium-Double-Coated-Carpet/dp/B003ZFGJ02#feature-bullets-btf This stuff should...
Mike, I'm not a CNC expert, but you may want to use a sturdy clamping system for 1/4" Aluminum, and add some tabs into your gcode. There's a...
He can borrow my kevlar apron :) 2+2=$.04
Being a carpenter for over 20 years, I've been exposed to more chemicals and carcinogenic dust on a daily basis than a California Lab Monkey. If I...
Water does not make a great activator for wood projects that require precision(like a cnc spoil board) as water causes wood and wood products(like...
