Separate names with a comma.
Some features disabled for guests. Register Today.
Light ring is supposed to be wired as shown here docs:blackbox-x32:connect-coolant [OpenBuilds Documentation] (Coolant Port - switches 24v...
About a 9 year old post, so updates (and relevance) rather unlikely (but if the original author is still around he may still answer) Perhaps...
LEAD CNC 1010 Laser Modification and Openbuilds LEAD Opt Lasers Laser Head to Upgrade Openbuilds LEAD CNC Machine - Opt Lasers
Mobile jog uses a feature called continuous jogging. Hold down button, when you let go it stops. For a short move, short tap.
Its mainly a CAM, not a CAD. docs:software:overview [OpenBuilds Documentation] Draw in a CAD (as fancy as you need it to be), bring the DXF here...
Nothing. 1.0.376 is "current" - newer development versions in pipeline for eventual release once nicely tested etc. Its not "out" yet, its in...
Exact same for Grbl and grblHAL by the way, if you do it right it works. But if you don't understand machine coordinates yet, its hard to...
Did you remember to save the project in CAM (File > Save Project (Export .OBC file) menu) Then load the saved OBC file from File > Open Project...
Set $44=2, $45=0 in Grbl Settings, Save and Reset when Prompted Additional or extended settings
Right at the top of the header will do
Laser mode on for Laser jobs, Laser Mode off for router jobs. Create macros or add $32=0/$32=1 commands to your CAM workflow so the gcode sets it...
Some can do 0-5v analog, but PWM doesn't work for most of those we've been involved with either (not smooth enough, sample rate too high) - must...
Consider an OpenBuilds BlackBox that covers all that and comes with the help and support you'll need (unlike with a DIY setup). See...
Do you maybe have Laser Mode enabled in Grbl Settings?
Agreed, soft limits are painful for beginners. Thats why we leave it off in our default profiles. Root cause for your error still likely...
Try YouTube. Around here we mostly use grbl/grblHAL as thats what the controllers we sell uses. Https://docs.openbuilds.com/blackbox-x32
No not possible
That particular log has no actual reset (hard limit alarm comes up normal) user then clicks Clear alarm.. It resets then (correct)
Just 0-10v (2 wire with GND and the 0-10v signal) docs:blackbox-x32:connect-vfd [OpenBuilds Documentation] BlackBox brings the 0-10v signal...
Move it away from the shop, into the house. Power it up with a USB charger and USB-C Cable, run the Self-test docs:interface:device-test-mode...
