Separate names with a comma.
Some features disabled for guests. Register Today.
Always happy to help, but you'd have to let go of the frustration and help me help you. Screenshots of flash logs, Grbl Settings backup, etc...
I didnt ask for any identifiers :) I asked for Because I did the same steps here 1) used grblHAL Web Builder to build a new 4-axes build 2)...
What you have there is not the firmware binary requested - also thats not the file to be flashed (there are several files in the ZIP, only the...
Good that that is back. Provide the firmware.bin you tried flashing so we can see, are you sure you used the correct parameters in grblHAL Web...
Yes, if you have a suitable spindle like a VFD: docs:blackbox-x32:connect-vfd [OpenBuilds Documentation] or even a Kress/AMB, any spindle that...
Reviewing your gcode, it does a 2.08 inch Z move (in work coordinates) right at the start of the job (Clearance move) [ATTACH] Looking at your...
The error just states the switch was hit, which you can see in the video too, so "as expected" As to why the machine moves up: Usually just...
Read and reread this section carefully until it makes perfect sense. Frequently Asked Questions In essence: position of homing switches...
We usually run a Black Fri sale of some sorts, but I don't know whether that kit will or will not be on special Best to direct store questions,...
Duplicate of Torch slows and goes off
We have a 1515 Conversion Kit these days, see Conversion to 1515 LEAD CNC
They are very different (microcontroller, USB chip, Firmware type etc) so that comparison is less direct than you try to apply. As you mention a...
Contact the store for assistance thanks
Spacebar (pause) or Escape (abort) Could program a microcontroller to emulate keyboard to send keystroke DigiSpark HID Keyboard Explained -...
Glad you found it. VFD manual always trumps others' notes
Extinguishing arc is usually related to - air pressure too high - worn consumables - cut height too high - wrong consumables (using drag cutting...
Relay 1? I do hope you read what I said above. Can, but shouldn't. Hoping you did not skip Min Freq config. Will refer you back to conversation if...
Most likely a wiring mistake or similar thus the request for wiring pics. There are differences between the two specially around toolhead wiring....
Sounds better. Dont mess with the defaults. Those others are for Servos (documented here docs:blackbox-x32:connect-rc-servo [OpenBuilds...
That is somewhat similar here, so lets bare it in mind as we continue Stock standard is a good start (5000) or could try 1000. Profiles doesnt...
