Separate names with a comma.
Some features disabled for guests. Register Today.
Preferably all wiring, not just PSU. Whats the other device wired to the Power Supply?
See section 3 of Terms of Service and Rules | OpenBuilds as provided during that threads moderation action [ATTACH] Now, Section 14 also...
Indeed, we do warn about it right there before you go flashing too: [ATTACH]
Reboot PC
And thats with VFD disconnected? Any other Grbl Settings changed from defaults (like for example the PWM freq etc?) Using a good clean power...
Reboot the computer. If its still doesn't connect, reflash with stock firmware. Flashing can't break anything. Double check that you are on...
No, just explaing the relation between 0-10v scale and what spindle should do (and why $31 should be 0, to let the VFD handle the minimum startup...
Grbl settings should be $30=24, $31=0 (Else the scale will be all wrong. 0V=0RPM, +-3.3V=7200RPM=turnon, 10V=24000RPM)
Thats indicative that the VFD's "Min Freq" parameter hasn't been setup yet or correctly. Air cooled have a minimum RPM of 7200 rpm (below that...
Please post pictures of wiring, power supply for review
OpenBuilds-CONTROL/app/wizards/interface/PROBE at master · OpenBuilds/OpenBuilds-CONTROL has a couple
docs:blackbox-x32:faq-emi [OpenBuilds Documentation] but with VFD specifically, main thing is to "stop the VFD being nasty" rather than "lets...
Induced in signal wire yes. But Power/GND present in bundle too, EMI induced electrical noise causing ripple on power rails... Other problems VFD...
Definately the older driver then - you should use the newest ones they handle DTR/RTS (autoreset handshake on connection) correctly. Removing old...
This thing [IMG] Is the IoT Relay IOT Switching Relay Power Strip And ONLY the Router should plug into it. Move the other plugs to the wall...
Garage Lift is always an option, keep it flat but up-and-away when not in use
That does answer it better yes. Thanks OK, lets do rule out firmware then: Use...
No, Rotary works for everyone else - not yet likely to be the issue
Refer my question again please. Or make me a quick video. We're looking for relation between DRO and command - right now you are not providing...
What does it do. Exactly. You are on what (Zero?) per the DRO? If not, Zero A You enter a command exactly like what? (G1 A180) It runs, to...
