Separate names with a comma.
Some features disabled for guests. Register Today.
Probably not so much the reflashing itself, as that the process upgraded the firmware, there was a bug with Hard Limits along with Wifi enabled at...
Still a tricky one. Does DRO stop at 180?
Disable Soft Limits for now - can revisit when its nicely setup. Might need to dig into it more on the CONTROL side, will add note to check
[ATTACH] G28 is not a Homing command. $H is (but usually done manually, not in gcode) G28 is "go to predefined position" (which is sometimes...
Yes, set A-Axis max travel to 0 Thats the $376 that should be 1 (along with correctly calibrated and zeroed) Are you sure its A180 (Not perhaps...
Still something in your soft limits config, personally I'd disable Soft Limits on a rotary axis ( $133 = 0 )
About spot on for those chinese 110mm 4th axes, they do have 6:1 pulley arrangement : Lead Lathe's is about the same too LEAD Lathe
Thanks for confirming, please get in touch with the store via Submit a ticket
Machine just follows gcode, so do post it for review
And without USB?
BlackBox otherwise in working order? (all the same lights on when USB is removed vs when USB is plugged in?)
Then it might not have A-axis set as a rotary: Reviewing your settings: Set this to $376=1
what does the DRO show? Was A zeroed before starting job?
1) Check mechanicals - both smooth throughout (Stalling could be a binding point, apply dry/PTFE lubricant to leadscrew, make sure all mechanicals...
20% of 5V is +-1V (though inaccurate to measure voltage, that percentage is the PWM duty Cycle Pulse Width Modulation - Definition, Terminologies,...
Yes the post processor includes G20/21 to tell the controller what the Gcode that follows is in $376=1 to designate A axis as Rotary is about...
See docs:blackbox-x32:connect-vfd [OpenBuilds Documentation]
Checkout other similar discussions =38"]Search Results for Query: xtool | OpenBuilds Mainly all laser modules has a power input, and a PWM input....
No experience with any, but might be 2x as much and 1/2 as slow (: But still, not too hard to find a neighbour with a printer Just watch out -...
If you find a good set of 3D printed parts, can always use 3D Printing Service | FDM, SLA, MJF, SLS & DMLS | Plastic and Metal Parts - PCBWay to...