Separate names with a comma.
Some features disabled for guests. Register Today.
Final version ,the fit is really nice. I've countersunk the screw caps so they don't interfere with the magnetic arms. I've attached a zip with...
Interesting, I'll have to print this and mess around with it. I'm curious if the 3 magnets creates more friction on the steel ball than a plastic...
Still have a lot of work until my CNC is cutting, so I decided to print my carriages (should make them much lighter). Here are the prototypes I'm...
I don't have a bed leveling system on my Rostock, and I don't plan to have on on my delta-six. get the bed as square to the vertical bars as...
Interesting you might not get the full range of motion with multiple magnets, you'd need to play with the angle of the steel ball. It also depend...
I'm using these magnets: K&J Magnetics: D58-N52 They hold up to 7.66lbs, you might find that your N35's won't be strong enough. If it puts it...
Progress! [ATTACH]
Arm length is something that gets debated a lot. That calculator was setup for very specific parts, basically you want enough to push the carriage...
Mine fit perfect off the printer, but my tolerances are about +-0.03 mm
I use this: http://www.thingiverse.com/thing:137140
Well here is my modified effector and the cad project(nvm doesn't allow .123dx extensions). I added tabs at ~5 degrees to fit these layer fans:...
The effector model was on a seemecnc thread by Xnaron for the magnet mod, I've modified it with tabs to hold the layer fans. I'm also modifying...
Magnetic effector printed and ready, here's the dry fitting. It is modeled after the one I have on my Rostock [ATTACH] [ATTACH]
Each side of the triangle was cut to ~14.75 inches or 375mm. I'm going to have 2 triangles on the bottom, and use leftover extrusion to space them...
[ATTACH] [ATTACH] I have officially started this build! Test fitting the length to make sure my calculations were correct. It fits the rostock...
Great kit! I'll be placing an order in the next few days, what would you recommend for spindle wattage?
