Separate names with a comma.
Some features disabled for guests. Register Today.
It is the machine controller that is responsible for movement - Openbuilds Control is just the messenger (same for UGS, etc.). G90 / G91 are...
It should do. For reference, this is what F360 outputs if you ask it to contour around the inside of a 10mm diameter hole 2mm deep with a 5mm...
I'm on the personal use licence. I did try the OB post, but switched back to the Autodesk one in an attempt to resolve some issue or other (maybe...
Now you're getting into the detail - there's a fuller explanation here: G Codes
Like the others have said, I usually design what I want in CAD first, and it's then a logical step to use CAM to generate the gcode (it means I...
In which case, I think you have either a problem with mechanical binding or a wiring fault / loose connection somewhere.
If you're concerned about belt stretch, then it's the total length of the belt that's important - You will need a slightly longer belt (=slightly...
This isn't bad: G02 / G03: Ciruclar interpolation (Theory & Examples) It's a lot easier to use a CAM program though.
That is backwards. Try setting $3 to 3 (currently 1) and check that the machine moves in the correct direction with the jog arrows. Y+ should move...
That doesn't make sense to me - what exactly did you do? Is it a moving table or moving gantry machine? If moving gantry, Y positive should have...
I think I have fallen foul of that very datasheet previously - I do not believe that the device can source/sink anything like 50mA. If you look...
There is a macro (not mine) that looks like it reads and manipulates the status of the window elements to determine jog settings that might be of...
It's pretty standard engineering... Not sure about that - just old. (Having spent my working life in various forms of manufacturing, some things...
I guess I have an idea in my mind about the sort of machine that would be rigid enough to meaningfully machine difficult materials like titanium:...
Not really... :D (To me, at least!). The GRBL settings are about telling the controller how to move the machine - if the machine moves as much as...
So you already have >1000 steps per mm and a theoretical resolution (at least) of <1µm. I think that everything else will be specific to your...
So that could well be right, then (my bad). Increasing the microstepping multiplier would increase the theoretical resolution, but even 32X would...
The configuration you posted above has the resolution as ~200 steps / mm, so your finest resolution would be 1/200 = 5µm. Does that configuration...
And my work around... Set the first job (in the default G54), and when the machine is at 0,0,0 switch to (say) G55 and zero out all the axes,...
Sorry, I saw 'CNC router' and thought you would be running GRBL on the Mega. I haven't got the foggiest about Marlin.