Separate names with a comma.
Some features disabled for guests. Register Today.
I didn't cut and paste into GRBL, I cut and pasted into the defaults.h and config.h files before I compiled. I tried using the default defaults.h...
It's loaded into an Uno. I tried a brand new one and got the same thing. I'm compiling using Arduino 1.6.3. I also tried using Grbl 0.9i with...
For some reason, for the last couple of weeks, when I put in $$, this is what I get instead of the entire settings list. Is there a setting to...
David, I don't think that modifying the JAVA code is an option right now. Since they are modifying the code daily, it would just change back...
Does anybody know how to set return to zero without it going to Z zero before X and Y go to zero? What happens is, wherever the machine is, it...
I got my C-Beam mounted and I am really happy with it. It is much more rigid than the original Z-axis and is the perfect mount for the dust...
It's not difficult on the threaded rods with the ball screws. Those aluminum connectors with the spiral cut into them (below) will break if too...
As an aside, I have limit switches and have run into the ends several times. Once because a stop came loose and once because a wire going to a...
That's why I was asking. Belts will slip or break, ball screws won't. The safe assumption is that a critical part, like a limit switch will fail...
Holy cow, talk about overkill. If you have an issue you could bend something. On my Ox, I have three) NEMA 34 170in/oz motors on X and Y and a...
I have several that I purchased from eBay for less than $5 each. I had a problem with one, it was rated at 120v, but when I hooked it up, the...
Dean, I lied to you. I got my numbers mixed up. I have a DW618, sorry.
I haven't had any issues. I only have around 40-50 hours on it, but it still runs like it did when I got it. The speed control works as intended,...
I never complained, I was just trying to learn. Sorry to have bothered you.
That's the router I have on mine. I drive the Z-Axis with a Nema 17 motor with no problems as long as I don't try to raise it too fast. Right now...
I thought the main reason for homing was so the software could determine where the hardware is. I saved your answer concerning work coordinate...
Because the Y axis has the two motors it is heavier. Depending on the type of projects you build, one axis will move much more than the other. For...
Sonny, I'm having a hard time wrapping my head around these concepts. They just seem backwards to me from a coordinate system concept. If I...
I haven't tried it, but everything I've read says it won't work. It apparently has something to do with timing. If you have all the parts, it...
The bearings just pop out of the wheels, just pry them out with the short end of an Allen wrench. You won't have a problem inserting a shim when...
