Separate names with a comma.
Some features disabled for guests. Register Today.
Glad you figured it out. I've never owned a computer that I didn't want to throw out the window at one time or another...and I've owned a LOT of them.
You may have mentioned it, but if you did, it was a ways back. I plan on implementing Mach 3 this summer, but as of now, I haven't used it. GRBL...
I'm not sure I understand. I have my Ox running under GRBL and once I hit a homing switch during normal operation, it shuts the motors down. It...
Try running the start-windows.bat file.
I got one with a coil that was loose. I soldered it back and when I hooked it up, it blew the fuse. I got some spare ones, but haven't gotten...
I don't have any pictures or video, my machine is in North Carolina and I'm in Tampa until the end of March. The home position ends up off the...
Something definitely is amiss. The scope should definitely show something. I don't know how anybody gets along without one. Have you checked to...
There isn't a lot to go wrong. I thought the weakest link would be the belt drive system, but I can't say that has been the case with me. There...
Sure you can. There are a lot of variables, though. Such as the market where you live, your contacts, the materials you intend to use, etc. When...
The holes are threaded all the way through and the plates are 5mm thick. There isn't a lot of space between the plate and the extrusion, so the...
Here's the settings from my Ox. It's about 24" x 38".
Look at the pictures in this thread: Cebu | OpenBuilds I thought the way you did until he posted the pictures. He shows that the clearance under...
I plan on converting my OX to a C-Beam Z-Axis. There is a lot more room than you show under the C-Beam. If you move the router down, there is...
The connections are here: Connecting Grbl · grbl/grbl Wiki · GitHub You can get by without a shield, but I don't recommend it. I recommend a...
I attached my current GRBL settings. Look through those. You want the Pulse Width as small as possible, 25 is too high. Mine work as low as...
My home position is actually off of the front of the table. It is someplace around X=-0.25, Y=-2. I built it so I could cut vertical pieces of...
I've got the sheet on a different computer, but I can't find it online right now. I know it's not the same board, but it has the same switches and...
I have one set of controllers that has those switches. I did a search on the model number and found a sheet someplace that had the English...
I know this is off topic, but I'm stumped. I've looked everyplace I can find and can't come up with the answer. I have a 7" lathe that I replaced...
That must be a defect in manufacturing. I've dealt with more than 20 of those and never seen one that didn't have a little square hole cut in the...
