Separate names with a comma.
Some features disabled for guests. Register Today.
1) I have been running it as slow as 3 IPM, Should I go even slower? 2) I have ran as many as 12 passes sometimes it works sometimes it does not...
I have been trying to figure out my laser for a bit now and am getting results all over the board. I though I was being smart by creating some...
I took your advice and measured the current draw. It peaked at 3.1. My laser has diodes in it. So, is better to keep the buck convertor and make...
Alright, the laser claims to be an 80Watt laser with 10Watt output. I don't have a great handel on Electrical Engineering but this is what I think...
Alright, some background. I bought a laser, added to my CNC which is using a CNC XPRO V5 as the controller. Jumped through all the hoops and got a...
Thank you everyone for the help. I did end up ordering a 12v power supply as my buck convertor failed again. I do not want to mess with that...
That looks very similar to the one I am using
Just finished my first project, there is a little staining I would lime to clean up, I would havr like the engraving a bit darker, but it looks...
What do you consider long jobs? I just ran mine for 9 hours and that seems like aong job. I do not like the idea of it failing mid job.
Well, the converter faild ina good way. It just stoped providing power all togeather. I did get another one in place. Maybe I should switch to 12v...
Well....I ran a really great sample and am very happy with how turned out. It was ran at a slower speed but I was able to make some changes and...
The machine is a lead screw system with a dual Y. I have had very little problems running the cnc with the 2500mm/min. Learning about the laser...
OK, update, I ran a successful test sample and it looks good. I had the program set to 100mm/sec at 65%. But I found out that my machine was set...
Ok, I ran a test of lines and this is what it looks like. The top line is at 100% speed 100mm/s, I stepped down in 10% increments. Then started at...
My PWM is set at 3k, per the vender (ebay) it is a 10k hz 80W I made a quick smiley face, ran it at 100% and 50 mm/s, got a very deep burn with...
Some really exciting stuff is taking place. The laser moves as anticipated, I am able to turn it on manually with the light burn software. It has...
I was able to find some more info, Lightburn has a CNC Machine option, when selecting that I was able to Set G10 L2 X0 Y0 and have the machine...
Evan, I finally got things put together and have been learning a lot, there is more than I thought I would have needed to know considering my CNC...
This is amazing info and I am thankfull you shared it. I have been busy getting thingthing ready to run my 1st sample. I would like to verify that...
Ok, my error was inputting the command for the macro, in cncjs I tried to paste it and it did not work. I typed it in by hand in both cncjs and in...
