Separate names with a comma.
Some features disabled for guests. Register Today.
Rick is right, I got a few plates like that as well but I drilled out the "non-eccentric" holes to 5.5mm. Drilling out the "eccentric" holes could...
Hello blynch, First, you should untighten the belts. Second, set the eccentric spacers so movement is still smooth without feeling stops (bumps)...
Hello JF, You can get more out of it, 12mm is easy to gain when you put the bottom of the Z axis flush with the X gantry plate. When you add...
Hello Colin, learned something new today, now I know what KISS is. I thought is was something like a risk assessment for design, and to keep it...
@Florian Bauereisen , any link on the KISS? I know others but KISS is new to me, would like to see how that can be applied, thank you. @Colin...
@Rick 2.0 : With the C-Beam actuators the 8mm versions became more popular so it's about 50/50 for 8 and 10mm (wrench size) spacers. @Adam...
To do it by head and without the drawing: C-Beam till half the wheel: 30mm Half wheel height: 5.5mm Shim: 1mm Spacer: 6mm Gantry plate: 2.93mm...
Yes they are all M5, we have M4 for the MeanWell 24vDC power supply but the rest is all M5. -Ronald
M5 if you use M5 screws, pre-drill the holes with 4.2mm. Or didn't I understand the question well? -Ronald
You might check out the Routy 310: Routy GT2 300 BSX CNC Router | OpenBuilds , and always go for the 14t pulleys. -Ronald
Yes you can but you have to fiddle to fit the motor supports to the gantry plates by using 3mm spacers, you also need to put feet underneath the...
Sure I wash them before I store them for cleaning! ;)
Silicon based works best, and for cleaning you might use WD40 and wipe it off when you are done. Not all lubricates work, some might affect the...
What about the stepper divider settings? 1/8? 1/4? The smaller the step, the less power you get from the motors. So, you have the MeanWell PSU?...
Motors are fine. Same here, I like the Pancutt stuff, still I would forget about getting something as small as possible and thus would leave...
Hello C, I'm almost done with those DRV8825; they are good for NEMA17 and small (short) NEMA23 motors, but they just become a pain in the behind...
I keep saying to Mark that it's the best 50USD out there, and I'm sure it outperforms some of the 600USD ones. You even get to test it out before...
Hello Richard, What error are you getting? G code sender works well under windows 8.x and 10, so it's not your OS. JAVA can be pulled fro the net...
Hello Kane, welcome to the forum. First we need to know about what actuator you are talking about. Are those 10kg directly mounted on the gantry...
Indeed, the DeWalt 611 has a soft-start and a mechanical relay will work. -Ronald
