Separate names with a comma.
Some features disabled for guests. Register Today.
R, What is shown on the picture above is most likely due to eccentric spacers not being set to give the most space between wheels, that and...
Hello Elvis, For communication to the xPRO you don't need a power supply other than the 5v that comes from the USB. Some time ago the designer of...
Bumping also may indicate over-pressure on the bearings by the way. -Ronald
Right. Sorry I missed that jumper on the photo else I would have told you to change it. Odd thing is, there was only one jumper with the board...
Hello Anton, Just use those wheels as they are. If they break you can always replace them. It will not affect much of the precision, if at all....
https://github.com/synthetos/grblShield/wiki/Using-grblShield is what you should read but it's a bit... well, "turn a notch back when it fails"...
Hold on there Nate, Those settings have nothing to do with your problem unless you move an axis 1mm in your program and 2mm on your machine....
It might be that the Z-axis motor is losing steps. What is the voltage of your CPU and how much Amperes are you giving your motors? -Ronald
It also depends on the load. The first Routy for example used just one eccentric spacer on an axle. But, I also would recommend to use two so it's...
Mark, thank you, now I can lower my hearthrate from 140 back to 80 ;). I knew it was included with the C-Beam machine but how the ... do you get...
Just trashed it... Pissing me off :mad:... Counts till 10 and continues with his life :thumbsup:.
I'm on the same boat as Gerald, man, if it doesn't have a compilation to an EXE things are getting complicated for a non Visual C/Basic...
Cool, I thought of taking down the Spanish forum as no one really cares about it although a lot of Spanish speaking people do tend to write in...
Besides that, the 12vDC of that ATX PSU will only give you 13A of juice PEAK! That's just 156W PEAK and about 120W continues. Now, for a simple 3x...
Hello Johan, Are you going to build it yourself? What is a reasonably priced solution, what's the budget? Frequency of use? Precision...
By the way, shield 3.10 doesn't have any fuse: [ATTACH]
Well, the bearings can be ordered from a lot of places all over the world so that's not a big problem there. TAIG I like, it got my eye and could...
I see, still lubricating stuff feels better for me :D. [ATTACH] Do you use SketchUp or are just building as it comes along? -Ronald
Yup, that would do it nicely, and a great size as well (21mm OD) as the flexcoupling is 20mm OD. I never implemented it in my designs as they are...
About the flexcoupling: [ATTACH] [ATTACH] You can see I use plate to mount the motor with 1-1/2" or 40mm spacers. The shaft of the motor should...
