Separate names with a comma.
Some features disabled for guests. Register Today.
I've not used a Duet for CNC, but I've used one extensively on one of my 3D printers. I use a BlackBox on my CNC. If I was to build another...
That's pretty close to the setup I went with recently. (Earlier this year.) With a couple of exceptions. I went with a Makita router vs the...
Here's the sketchup model showing how they go between. This gives the clearance for the bolt heads holding the wheels on (circled in red), as...
I had just edited my post to point that out as you posted that! Lol
No, it doesn't sit in the slots. It's sandwiched between the front laser mount plate, and the gantry plate. It provides a little space for the...
Apologies! No offence intended! Control works find most of the time, but when I moved to Fusion 360 for CAM to do some 3D cuts, I ended up...
Did you know that Fusion can run a simulation for you as well? And it can handle more complex cuts that can make the Control simulation puke.
Other then your frame, you'd want Blackbox Limit Switches are useful, but are not required or necessary Power Supply - You'll need a power supply...
Take a look at some of the samples here for 6W laser test. Documentation (The 2nd and 3rd articles... first one is for the 2.8W.) This will...
This is a relatively small and compact Z Axis for the ACRO motion system. The primary reason for me wanting to add a Z axis was to change the z...
romamaker published a new build: Created a small Z axis for the ACRO motion system. I wanted to more easily adjust the height of the laser to...
After playing around with a few designs, and changing my mind several times, I think I finally decided on a design I like. Had to order a couple...
This would typically be handled by your CAM software, when you generate the gcode. Are you using Openbuilds CAM by any chance? If so, you want...
Playing around with etching denim now. Really impressed with the results! [ATTACH]
I figured it's got something to do with the size of the pockets. But they are slightly larger then the too. Tool is 0.8mm... those pockets...
Still learning, but having a lot of fun! Tired another 3D cut using Fusion 360, and have a couple of more questions. LEAD machine, using...
Just a little food for thought... what if you swapped the motor and the idler pulley. (From the original design) This would give you more tooth...
I have pretty much finished up my ACRO build with an enclosure. This is an ACRO 1010 kit. Added a couple of drag chains in place of the tubing...
Thanks. Had already figured it out. Was able to run my job last night and it came out perfect!
So, it was a setting in the post process. Didn't pay that much attention to it at first. There is an "End of job" position for each axis. Z is...
