Separate names with a comma.
Some features disabled for guests. Register Today.
This one used 6000 in slic3r for everything except first layer which is 4000. Slic3r changed start point to another corner on the top 2mm for some...
The issue is it won't 0 to the endstop if the INVERT is set to the wrong state. So, yes, leave the home_dir as it is but make the INVERT run it...
this is what mine is // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR...
Can anyone shed some light on this?? I have 2 prints of similar objects. 1 has default settings for accel.- 1 has accel of 6000. The 1 with 6000...
I have asked a number of times and I guess the developers have no clue if it works. They kept telling me it did not. BUT it only does not work for...
FYI - I just tried BABYSTEPPING_Z in Marlin on my unit and it works!!!!!! For those who may not know - babystepping allows you to increment the...
I'd be interested to know if they improved any. If u look at the screw with a glass u can see if there r cut tool marks in the grooves. It looks...
Yes, I give Openbuilds a 10 for customer support, they sent me 3 replacements and they were all the same. The leadscrews look like they were made...
Let me add my 1ยข I have 3 screws and 1:1 gearing (same pulleys on screws as on motor). They are not trivial to get right. It took me a lot of...
What happened is as I turned the screws on the corners of the rail with 1 Z screw the bed stayed and the rails twisted. It seems to me that even...
I have a 12x12 3 screw setup. I ran into an issue with leveling mine with 4 points. The leveling screws on the ends of the rail with the single...
I am trying to figure out how one comes up with ur steps/axis. mine r 200,200,800,299,9 for X, Y, & Z ur numbers r 0.13%, 0.27%, % 0.6137% dif...
It may be that my motor currents got out of adj. How often does one need to check those? I am certain they were set accurately in the past and I...
Thx, I will chk that, but I have not had any issues with overheating since I built it (months ago). The motors r just hanging in free space, no...
Actually, the defaults are much lower now. They were higher in the past. these r current RC 2 settings #define DEFAULT_MAX_ACCELERATION...
here is a pic of the platform. It just cant twist that way. Even if it could I wouldn't see that kind of change! [IMG] My jerk settings appear to...
Any ideas?? This print is little strange and I have no idea what happened. It is obviously an issue with the drive, as the slic3r shows a...
this is an uncalibrated spring gauge but a quick check with my scale indicated that it is close enough for government work. With the carriage to...
the typical answer for tightening "belts" is 1/2" deflection when pushes with moderate pressure. Of course these r different but the feel is...
I don't think so. The accel & jerk settings r typically what causes ringing. If the belts r not tight enough I could see that as causing ringing....