Separate names with a comma.
Some features disabled for guests. Register Today.
Yes, I think I am @ about $800.00, but I also bought some extra stuff, and modified the platform - but I ended up with some free stuff also (not...
Try reducing the jerk first to reduce the ringing.
The strings r from being too hot - try 195 for other than first layer and 200 for 1st. Mine r now extremely fine and few. I don't know if I can...
The std MOSFET control switches the GRD and +12V is applied to the component all the time. The circuit is simpler this way with drive from an IC....
using ur 0.12 settings I got this Benchy I'm still working on 3D Hacker - it keeps coming loose, I need to add a brim to it
both of those cases r not the same. my display has 2 buttons on it and a light time adj that is crap but it is accessed via a hole in the front. I...
my first one was not good past the 1/2 way mark - actually the bottom wasn't great either. that was with 0.4mm nozzle and poor cooling. now i...
in fact, i found my pivoting frame - I think carl posted it long ago.
r u talking about this one? http://www.thingiverse.com/thing:219024 is the one i used, i thought carl posted but i can't find it. it is probably...
u can seriously stiffen the uprights by attaching a 3"-4" wide 1/8" board across the members. The shaking of the unit should not cause any issues...
this is the one I have tried in PLA with not much success. http://www.thingiverse.com/thing:105054
IMHO, which is not very refined, I would say loose belts or jerk/acceleration settings r way too high. My belts r tight enough that when I hook my...
I have had 3x 12V 40A supplies (the cheap LED versions from China). One I fried with a short on my hotbed. But the spec specifically states that...
I am using a Ramps 1.4, Marlin, and Slic3r and running 1.75 PLA/ABS with a 0.4mm nozzle on Windows. I also have a Bowden feed. I have printed a...
I can't wrap my head around what u mean by that. Can u explain it? It sounds like it would be a firmware issue not a printer issue. what firmware...
Carl! I have been working on building the "fan shroud" from ur file in sketchup. I have dnld it a number of times and apparently each time I did,...
I was very interesting. Held at the local tech college by 3D-Hubs, which has established a presents world-wide now. The tech college has a 3D...
Awesome CptnBry - I'm loving this discussion. I just returned from a 3D Hub meetup. I was the only one there with a home built machine and it...
Mine is a 3 screw setup and it is not too hard to rock the single screw side but it is stable under operating conditions. I only have a single...
FYI If u r using Slic3r and have not upgrades to 1.2.9 stable yet - do it. It solved an issue I thought was my printer and settings with thin wall...