Separate names with a comma.
Some features disabled for guests. Register Today.
@adamcooks as I recall u have 3 screws belt drive - right? If so can u give me some tips on adjusting them? Things run almost as smooth as butter...
here is a news flash - there is a Marlin Developmental v1.0.3 available that does implement QUICK_HOME properly for CoreXY....
Whatever works for u. Since I shrunk mine i didn't have the space to work with something like urs and I am planning on mounting the model fan on...
talking is easy, documentation is hard.........here u go -- mine is with the idlers at the "front" and it homes in the front left corner. The...
I shrunk the outline by ~ 2" in width so I mounted the X endstop to the back carriage plate and made a small pusher that attaches to the H end...
If anyone is using A8825 drivers on a Ramps bd I would like to know if u can tell me what temps the heatsinks r running. Mine seem to get to 45°C...
I think u need to consider the duty cycle. U can use 2 Y motors or 2 X motors BUT they do it by using one of the extruder drivers (IE 2 drivers)....
For anyone using the corner brackets I posted, I found a small (0.25mm) error that I corrected. U probably won't notice it if u already printed...
BTW. If u make my bottom corners, be advised that u must install them carefully. I cracked some 90° edges on a couple of mine - fortunately. once...
It is incredible how easily I can confuse myself. thx Can u give me some idea of good speeds to start out with in slic3r? Have u modified any...
I don't know what is wrong with this forum but I tried to answer 2x and it only posted one paragraph each time. hopefully this will work. Anyway,...
OK - I redid the post and it cut it off again - I'll retry later
Sorry - I lost 3/4 of my reply when I clkd POST
mine is 8 lead 2 pitch == same as urs I would say. U can set movement speed in gcode but I am just using the Repetier circle. The speed settings...
They all home X first, don't they. But I think he defines his X axis as front to back which is why he rotates it. He also has to consider his...
I finally have my baby powered and All motors are running AND in the proper direction, all endstops are working on the proper axis. I am using a...
U may have them on backwards or one up-side-down- easy to do if u r not looking like I did. Both sides need the ramps across from each other and...
here is a pic of my "fix"
I have just discovered that the endstop bd a lot of ppl seem to be using is messed up. This may be why it does not work on some systems. Look at...
