Separate names with a comma.
Some features disabled for guests. Register Today.
Sorry, misunderstood the thread link. I will try again. Thank you.
Re-installed V1.0378 but am still having problems with Blackbox. It seems to make the connection but it isn't retrieving the GRBL. Here's what...
I received and message to update CONTROL to the latest update and now it won't run jobs. This is what I get when connecting. Not sure what to do....
Thank you Peter, I'll recheck all of the mechanical connections, although I've done this dozens of times already. The motors are Openbuilds...
I have a Workbee 1010 with Black Box 32. When moving the Y-Axis 10mm one motor moves 10mm while the other moves 11.2mm. What should I investigate...
Thank you, Peter.
I've been using the Workbee 1010 for about 2 years to manufacture a multi-piece wooden instrument stand out of various woods and over the past...
My apologies, did not recognize that Gary's post was a link and not a statement, sorry. So, I did install the post but when I post process it I...
Hey Larry, what was the reason for the control board change? I'm having problems with my Workbee and can't figure out if it's UGS or the xPro...
Hi Gary, Here are my current grbl $$ settings and one of the fusion generated cnc files. On this particular file the Z-Axis plunged into the...
Hi Gary, thank you for the response. So I'm using the correct one? Grbl/grbl? Which means the errors are occurring either with UGS or at the xPro...
Which post processor should be used to generate G-Code from Fusion 360 to the xPro? I'm using the Grbl/grbl configuration selection but sometimes...
It's been a while since I posted. I've spent about 40 hours so far troubleshooting this 1010. I'm sure it's my lack of knowledge (or just...
Oh, and by the way, the switches are NO.
Being a 'newbie' I can only go by what I've read on the myriad of CNC posts here and elsewhere. And the consensus is that Limit Switches are an...
Hi Mark, can you re-post this picture? It's no longer available. I'm still having problems with my Limit Switches and I'd like to see if I have...
When executing a "Home" command $H the Z-Axis rises and hits the Limit Switch then grinds for about 30 seconds then generates an Error and informs...
$100, $101, and $102 = 199.1
Which GRBL lines are those?
So here's my latest problem: the CNC is not cutting according to my designs. The attached photos and pictures show what the planned part is...
